Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Networks
?
?
Networks??

Coaxial connector tailored for PCB verification

Posted: 15 Jul 2009 ?? ?Print Version ?Bookmark and Share

Keywords:coaxial connector? verification? PCB?

LCP CP1/CP2 connector

ITT Interconnect Solutions has unveiled an RF switching coaxial connector designed for antenna and PCB performance verification. The LPC CP1/CP2 connector features a high frequency range and low insertion loss, thus making it suitable for handheld and wireless applications.

Keith Teichmann, director of marketing for ITT Interconnect Solutions explained that "the RF switching connector provides an effective solution to passive switching between an internal circuit and external devices such as test equipment or an antenna."

The LCP CP1/CP2 connector features a low signal loss of under 0.3dB, a minimum life of 12,000 mating cycles and a return loss VSWR of 1.2:1 at 2GHz. A cold pin minimizes RF emissions in unmated scenarios. The connector also features a low-profile 5.6mm test port, along with the ability to address angular and offset misalignment. The connector is also available in a waterproof version (LPC SP1), which features a special rubber seal for IP67 compliance.

A wide range of accessories are also available to address various test requirements. Typical pricing for the LPC connector is approximately $0.275 each in medium volumes. Lead time is 10 weeks.





Article Comments - Coaxial connector tailored for PCB v...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top