Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

Automotive MCU tailored for ultrasonic sensors

Posted: 05 Oct 2009 ?? ?Print Version ?Bookmark and Share

Keywords:MCU? microcontroller? sensor? automotive?

MAXQ7667 MCU

Maxim Integrated Products expands its MAXQ RISC microcontroller product line with an SoC mixed-signal MCU for ultrasonic sensor applications.

The MAXQ7667 is a highly integrated data-acquisition system that provides a cost-effective solution for applications that must measure weak signals over long distances or identify multiple targets. Its integrated functions allow designers to add intelligence to cost-sensitive sensor-conditioning applications. The MAXQ7667 is optimized for automotive-sensor systems such as electronic parking assist and park-distance control. It is also suited for industrial processing, automation, and handheld applications requiring position measurement.

This 7mm x 7mm device integrates the main functional blocks required to accurately measure position, including burst control (pulse transmission), analog echo reception, DSP, and an MCU. This advanced integration reduces system cost and increases sensor-mounting options.

It features a programmable burst-frequency generator to compensate for transducer tolerances, adjust frequency with temperature, and perform diagnostics. Programmable burst and duty cycles can optimize power to match environmental conditions. The echo receive path includes a variable gain amplifier, a 16bit sigma-delta ADC, a digital bandpass filter to eliminate out-of-band noise, and a digital demodulator with lowpass filtering to create an echo envelope. Echo detection is supported by an interrupt-generating, 16bit threshold detector with programmable threshold and hysteresis levels. The MCU can be used for additional signal processing, or it can act as the threshold detector.

The integrated 16bit, 16 MIPS MCU supports 32Kbyte of flash, 4Kbyte of data RAM, and 8Kbyte of utility ROM. The MCU can be programmed to dynamically optimize parameters, vary threshold based on time and noise, optimize frequency to match the transducer, and adjust power and threshold based on the location of targets. Additional features include a general-purpose ADC for diagnostics and temperature measurement, a LIN-compatible UART with address capability, three general-purpose timers with interrupt capability, a system timer, GPIO pins with interrupt capability, and single-supply operation.

The MAXQ7667 is available in a space-saving 48-pin LQFP package, and is fully supported over the -40C to +125C automotive temperature range. Prices start at $8 (1,000-up, FOB USA). An evaluation kit is available to speed designs. This kit includes an evaluation board and a PC-based IDE (integrated development environment), which provides a debugger, assembler/linker, time-limited version of the IAR C-compiler and simulator.





Article Comments - Automotive MCU tailored for ultrason...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top