Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

Mini driver IC cuts space in stepper motor designs

Posted: 08 Dec 2009 ?? ?Print Version ?Bookmark and Share

Keywords:driver IC? stepper motor? microcontroller?

AMIS-30532/42 motor ICs

ON Semiconductor rolls the AMIS-30532 and AMIS-30542 micro-stepping stepper motor drivers that have high current capabilities with integrated H-bridges suitable for high-current motors. The driver ICs offer reduced component count and smaller board space in stepper motor-based applications for automotive, industrial, office equipment, medical, security and marine electronics.

Designed for use with two-phase stepper motors and a host microcontroller, the AMIS-30542 mixed-signal motor driver ICs provide high accuracy and reliable motor control, and deliver maximum current outputs of 2.2A continuous and 5A peak. Each device integrates smart motor control capability with voltage regulation, on-board current sensing, and a number of protection and diagnostic functions. This level of integration eliminates the need for external switches and sense resistors. The on-board speed and load angle feedback allows removing expensive end of line switches and hall sensors on applications ranging from surveillance cameras, robotics to printers, industrial automation equipment and textile machines.

The new ICs feature two embedded H-bridges and connect to a host MCU via an SPI interface and dedicated I/O pins. Each chip provides speed and load-angle output, which allows for the accurate control of motor torque and speed, as well as the creation of stall detection algorithms. Seven step modes can be configured, from full step to 32 micro-steps. An on-chip current translator is used to calculate the appropriate PWM current based on the clock signal at the "NXT" input pin and the status of the direction register or input pin. The PWM current control includes automatic selection of fast and slow decay modes.

Both the AMIS-30532 and AMIS-30542 are compatible with 5V and 3.3V MCUs. The integrated voltage regulator can be used to provide MCU power, thus minimizing further the need for external components. Each device also incorporates a MCU reset function and an integrated watchdog function. Thermal warning and shutdown functionality and full output protection and diagnosis capabilities are also provided.

"Combining high-accuracy speed and torque control with higher integrated current capability is addressing a broader range of motors and emerging applications while saving space and reducing component count," said Guido Remmerie, director motion control and energy management products at ON Semiconductor. "Combining industry-leading levels of integration with ultra-miniature NQFP packaging, the AMIS-30532 and AMIS-30542 address these criteria at the same time as providing the reliability required for demanding applications such as those in the industrial and automotive arenas."

The AMIS-30532 and AMIS-30542 are available in an NQFP-32 package that offers profiles of less than 1mm and footprints of 7mm x 7mm. Unit prices for quantities of 1,000 are $5.30 for the AMIS-30532 and $5.60 for the AMIS-30542.

For application notes on motor driver click here.





Article Comments - Mini driver IC cuts space in stepper...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top