Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Power/Alternative Energy
?
?
Power/Alternative Energy??

PV Forecast: Rising demand, lower costs enable higher margins

Posted: 16 Feb 2010 ?? ?Print Version ?Bookmark and Share

Keywords:photovoltaic? PV? outlook? incentive? Feed-In-Tariff?

Annis: Incentive policy decisions will determine the timing of the next [solar] cycle.

2009 proved the solar industry can be highly cyclical. After averaging 15 per cent between Q1 06 and Q4 08, profit margins for a group of 14 leading cell and module manufacturers suffered a precipitous drop to -10 per cent in Q1 09 and remained negative in Q2 09. The significant losses were caused by the capping of Spain's Feed-In-Tariff (FIT), the worldwide economic crisis and tight credit markets.

Excess manufacturing capacity and oversupply throughout the supply chain during the first half helped push average photovoltaic (PV) system prices down more than 25 per cent. These lower prices, somewhat easier financing, diversification of the demand base and positive incentives in multiple regions helped push demand and most leading producers into the black in Q3 09.

Incentives impact
Incentives are designed to increase demand by improving the economics of installing a PV system. But on the other hand, fear of incentive reduction can also push demand, as users rush to install systems before benefits expire. Expectations that the new government in Germany will further lower FIT rates is one the most important current demand drivers. Changes or new incentives in Germany, Italy, Japan, America, France, China and other regions are now forecast to cause demand to grow more than 40 per cent in 2010. Solar cell and module makers should see average profit margins increasing in Q4 09 and towards 20 per cent in 2010.

In 2010 solar cell manufacturers will continue to focus on cost reduction as they try to push PV towards grid parity while simultaneously maintaining margins. Key methods for reducing costs include using less expensive silicon, using less silicon or not using silicon at all.

Figure 1: PV revenues, profit and margins for DisplaySearch's index of module manufacturers.
Source: DisplaySearch Quarterly PV Cell Capacity Database & Trends Report

Polysilicon is the primary material of wafers used to fabricate crystalline silicon (c-Si) solar cells. It alone can account for 15-20 per cent of the cost of a PV module. As the result of a large ramp up of p-Si capacity just as demand was collapsing, an oversupply caused p-Si prices to drop dramatically from the 2H 08. The rate of decline has moderated now but supply is expected to still be more than sufficient in 2010, further weighing on p-Si prices.


1???2?Next Page?Last Page



Article Comments - PV Forecast: Rising demand, lower co...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top