Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Memory/Storage
?
?
Memory/Storage??

Connecting a MPC56x MCU to the M58BW016B/D flash memory

Posted: 01 Mar 2010 ?? ?Print Version ?Bookmark and Share

Keywords:connecting MPC56x MCU? flash memory? glue logic?

This application note describes a method of connecting the M58BW016B/D flash memory to a MPC56x MCU without using glue logic. The M58BW016B/D is an advanced 3V 16Mbit flash memory from Numonyx. It has a boot block architecture and includes a burst interface for high speed access. The M58BW016B has Tuning Block Protection, whereas the M58BW016D has the Tuning Block Protection disabled.

The MPC56x family is a member of Motorola's MPC500 family of integrated microprocessors that are compatible with the PowerPC instruction set architecture. The MPC56x is a family of a low-voltage high performance 32bit MCU designed for advanced automotive applications. The devices can run at frequencies of up to 56 MHz within the full automotive temperature range using a 2.6V power supply. The M58BW016B/D can operate at the 56 MHz maximum burst frequency required by MPC56x. The internal memory controller of the MPC56x supports single read/write operations, burst read operations, and provides a programmable and flexible bus interface.

View the PDF document for more information.

Click here to view related datasheets.





Article Comments - Connecting a MPC56x MCU to the M58BW...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top