Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Power/Alternative Energy
?
?
Power/Alternative Energy??

Protection IC packs power management bus support

Posted: 03 Mar 2010 ?? ?Print Version ?Bookmark and Share

Keywords:power management? protection IC? PMBus? MOSFET?

LM25066 protection IC

National Semiconductor Corp. has introduced a system monitoring, protection and control IC with on-chip power management bus (PMBus) support. The LM25066 provides designers of blade servers, storage networking systems, routers/switches and modular subsystems with a solution that improves system reliability and reduces operating expenses in data centers.

National's LM25066 integrates high-performance monitoring, protection and control blocks that precisely control and manage the electrical operating conditions of each blade in the chassis. It also provides accurate monitoring of critical system power consumption and fault conditions.

The LM25066 continuously supplies the system management host with real-time power, voltage, current, temperature and fault data for each blade subsystem. The LM25066's system management bus (SMBus) communications interface delivers this data using the PMBus protocol. The host's system diagnostic and optimization routines use the data to increase system reliability and minimize the data center's total power consumption.

The LM25066 features a voltage input range of 2.9V to 17V and a selectable 25 mV/50 mV current limit threshold for addressing a wide range of intermediate bus voltages and load currents. The LM25066 monitoring block measures both current and voltage at 1,000x per second with a current measurement accuracy of three percent over the full temperature range of -40 to 125. Additionally, its simultaneous sampling of current and voltage provides a true power measurement of the server blade power consumption. The monitoring block also captures the peak current and peak power and computes the average of subsystem operating parameters (Vin, Iin, Pin and Vout).

A temperature monitoring block on the LM25066 interfaces with a low-cost external diode for monitoring the temperature of the external MOSFET or other critical temperature source. The LM25066 reports the status of all system parameters and fault conditions through the SMBus interface and offers individually programmable warning thresholds for all faults. This feature provides design flexibility and dynamic system protection.

The LM25066 control and protection blocks include National's unique hot-swap architecture that provides both current and power limiting to protect sensitive circuitry during insertion of boards from a live system backplane or any other "hot" power source. The LM25066 protection block also provides adjustable under/overvoltage and hysteresis.

National supports the LM25066 with a suite of powerful development tools that simplify application design and system verification. System designers may also use these tools to create value-added features for their subsystems.

The LM25066 is supplied in a 4mm x 5mm, 24-lead LLP package and is priced at $5.95 each in 1,000-unit quantities. The LM25066 is sampling now with full production volumes expected in Q2 10.





Article Comments - Protection IC packs power management...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top