Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Power/Alternative Energy
Power/Alternative Energy??

Supercap charger cuts need for balancing resistors

Posted: 10 Mar 2010 ?? ?Print Version ?Bookmark and Share

Keywords:supercapacitor? charger IC? USB?

LTC4425 supercapacitor charger

Linear Technology Corp. is rolling out the LTC4425, a two-cell supercapacitor charger that address high peak power, data backup and "dying gasp" needs in portable and data storage applications. The device employs a linear CC-CV architecture with thermal limiting to charge two supercapacitors in series to a programmable output voltage from a Li-ion/Polymer battery, a USB port, or other 2.7V to 5.5V current-limited supply.

The LTC4425 features two operating modes: charge current profile (normal) mode and LDO mode. The device's charge current profile mode charges the top of the supercap stack to the input voltage VIN with a charge current that varies inversely with the input-to-output voltage differential in order to present excessive heating. The LDO mode charges the stack to an externally programmed output voltage with a fixed charge current that is also externally programmable. Charge current is resistor programmable up to 2A (3A peak), and each capacitor is protected against overvoltage by internal shunts (2.45V/2.7V selectable). The LTC4425's onboard current-limited ideal diode features extremely low 50m? resistance to prevent back-driving of VIN, making it suitable for a wide variety of high peak power battery and USB-powered equipment, industrial PDAs, portable instruments and monitoring equipment, power meters, supercap backup circuits and PC card/USB modems.

The LTC4425's automatic cell balancing feature maintains equal voltages across both cells, eliminating the need for balancing resistors while protecting each supercapacitor from overvoltage damage and minimizing current drain on the capacitors. The IC operates with a very low 20?A quiescent current when the output voltage is in regulation and draws only 2?A in shutdown from either VIN or VOUT, whichever is higher. The basic charging circuit requires only six external components and is highly compact, offered in a tiny 9mm x 9mm package footprint as well as a leaded package. Other key features include a VIN power fail indicator and continuous monitoring of VIN to VOUT current via the PROG pin. Additional protection features include current and thermal limiting that reduces charge current in cases of excessive temperature.

The LTC4425 is available in two compact, thermally-enhanced packages; a 12-lead, low-profile (0.75mm) 3mm x 3mm DFN package and a 12-lead MSOP package. Operation from -40C to 85C operating junction temperature is guaranteed. The LTC4425 is in stock, priced starting at $2.25 each in 1,000-piece quantities.

Article Comments - Supercap charger cuts need for balan...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top