Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Optoelectronics/Displays

LCD makers rise up to e-paper challenge

Posted: 12 Mar 2010 ?? ?Print Version ?Bookmark and Share

Keywords:LCD? e-paper? reflective display?

LCD-equipped device users have picked fast colors over the better readability and longer battery life achieved with reflective (non-backlit) displays. But with e-paper encroaching on their turf, several LCD makers are pushing back by resurrecting reflective techniques.

Pixel Qi, a startup spun off from the One Laptop per Child (OPLC) initiative, is providing the display for a $75 laptop that OLPC intends to ship later this year. The Pixel Qi dual-mode transflective LCD doesn't boast the paper-white background of E Ink's Vizplextext displayed on the screen looks like it's printed on a mirrorbut it does have a low-power monochrome mode, plus it can be switched to a color mode that supports full video frame rates at a fraction of the power required by backlit LCDs.

"Pixel Qi is very good in bright sunlight but works in dim light as well, plus it offers full-motion video and vivid colors," said Richard Doherty, principal analyst at Envisioneering. "If you want the fast response time of an LCD, Pixel Qi looks very good, but if you are satisfied with multisecond page turns for reading books, then E Ink rules the roost for a while longer."

Kent State spinoff Kent Displays Inc. uses a roll-to-roll process to manufacture cholesteric reflective LCDs that are low-cost, flexible and very thin. Kent has licensed the technology to Varitronix and to Fujitsu Frontech, maker of the Flepia color e-book reader (sold only in Japan).

Kent Display's bistable cholesteric LCD locks crystals in either a planar texture state (which reflects ambient light) or a focal-conic state (which scatters it).

Cholesteric LCDs use bistable states of the bulk LCD material, which can maintain either a planar texture (which reflects ambient light) or a focal-conic texture (which scatters it). The displays achieve a very low cost point by using a passive-matrix backplane that still maintains millisecond refresh times. Kent has demonstrated its cholesteric LCDs on substrates of glass, plastic and even fabric. Hitachi and Kodak have also shown prototypes of cholesteric LCDs.

Nematic chemical formulations use the surface characteristics of the LCD crystals, instead of the bulk state, to enable bistable displays in "twisted" or "untwisted" modes. Nemoptic Displays (Paris) offers nematic displays mounted on glass. ZBD Displays uses a similar mechanism to lock pixels in its Zenithal bistable display using inexpensive passive backplanes on plastic or glass.

- R. Colin Johnson
EE Times

Article Comments - LCD makers rise up to e-paper challe...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top