Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

Controllers deliver fast clock speed at low power

Posted: 25 Mar 2010 ?? ?Print Version ?Bookmark and Share

Keywords:controller? processor? interface? embedded control?

Tensilica Inc. has launched its third generation of Diamond Standard controllers that comprise of five upward-compatible processor cores based on a common Xtensa architecture. The new controllers deliver up to 15 percent faster clock speed, up to 20 percent smaller die area and up to 15 percent less power consumption. They are targeted for a wide range of embedded control functions in compute-intensive dataplane functions.

"The Diamond processor family provides our customers with significant improvements in speed/power performance in the widest range of fully compatible 32bit controllers in the industry," stated Steve Roddy, Tensilica's VP of marketing and business development. "These deeply embedded control cores can also serve as a starting point for customization of a tailored Xtensa dataplane processor for designers looking to incorporate additional control or signal processing capability."

The ultra-low-power Diamond 106Micro is a small cache-less controller with memory protection, an iterative 32x32 multiplier, 15 interrupts, integrated timer and on-chip debug hardware that achieves Dhrystone 2.1 results of 1.22 DMIPS/MHz.

The small Diamond 108mini adds a 32bit integer divider, dual local data RAMs, 22 interrupts, three integrated timers, and dual 32bit GPIO (general-purpose input/output) ports. It achieves Dhrystone 2.1 results of 1.34 DMIPS/MHz.

The Diamond 212GP adds data and instruction caches and 16bit DSP instructions, and achieves Dhrystone 2.1 results of 1.38 DMIPS/MHz.

The Diamond 233L has the same features as a Diamond 212GP and adds a memory management unit optimized for Linux operating systems.

The ultrahigh-performance Diamond 570T is a three-issue VLIW (very long instruction word) core with dual 32x32 MULs and 16Kbyte, two-way set associative instruction and data caches, and achieves Dhrystone 2.1 results of 1.59 DMIPS/MHz.

The Diamond Standard processors were designed with easy SoC integration in mind. All of the Diamond controllers are available with support for AMBA AHB-Lite and AXI bridges with asynchronous or synchronous clocks. In addition, on the Diamond 108Mini, 212GP, and 570T, designers can bypass the system bus altogether in order to achieve much higher input/output I/O bandwidth and seamless integration with RTL via direct GPIO connection interfaces for data and system monitoring and control. The Diamond 570T also provides 32bit FIFO interfaces for direct data I/O interface with other system blocks without using the system bus.

The Diamond Standard processors are available now.

- Toni McConnel
Embedded.com





Article Comments - Controllers deliver fast clock speed...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top