Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Networks
?
?
Networks??

Managing the driver enable signal for RS-485 and IO-link communications with the STM32's USART

Posted: 11 May 2010 ?? ?Print Version ?Bookmark and Share

Keywords:RS-485 IO-link? STM32 USART communications? timing measurements?

RS-485 and IO-Link are half-duplex communication protocols that offer easy ways of implementing the physical layer in industrial networks.

The STM32F10x, which comes with up to 5 UART interfaces and features fast DMA transfer and low interrupt latency, meets the RS-485 and IO-Link timing specifications. This application note aims at providing timing measurements of the DE signal (Driver Enable) switching by using two different methods for managing this signal in RS-485 and IO-Link master transmission.

The application note is organized into three parts: it first explains why the timing of the DE signal is critical; it then describes the two methods used to manage the DE signal; and finally, it gives different measurements of the DE signal switching time.

View the PDF document for more information.

Click here to view related datasheets.





Article Comments - Managing the driver enable signal fo...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top