Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Power/Alternative Energy
?
?
Power/Alternative Energy??

2A battery charger is solar-input compatible

Posted: 10 Jun 2010 ?? ?Print Version ?Bookmark and Share

Keywords:battery charger? solar panel? power supply?

Linear Technology Corp. is offering LT3652HV, a higher voltage version of the innovative LT3652 monolithic buck battery charger for modern battery chemistries.

The LT3652HV offers a wider battery float voltage range than the LT3652up to 18Vand features the same input voltage regulation loop that controls charge current to hold the input voltage at a programmed level. The LT3652HV has the flexibility to charge many different battery configurations from various input supplies, and when it is connected to a solar panel, the input regulation loop maintains the panel at peak output power.

According to Steve Pietkiewicz, VP and general manager of power products, "The LT3652HV, with its increased output voltage capability, is a welcome addition to our growing line of solar input compatible battery charger ICs. Like the LT3652, its simple but unique input voltage regulation loop circuitry delivers virtually the same charging efficiency as more complex and expensive Maximum Peak Power Tracking techniques."

The LT3652HV accepts a wide range of inputs from 4.95V to 34V with a 40V absolute maximum rating for added system margin. The input voltage regulation loop also allows optimized charging from poorly regulated sources where the input can collapse under overcurrent conditions. It charges a variety of battery pack configurations, including one to four Li-ion/polymer cells in series, one to five LiFePO4 cells in series and sealed lead acid batteries up to 18V. Applications include solar-powered systems, 12V to 24V automotive equipment and battery chargers.

The LT3652HV's charge current is programmable up to 2A. This stand-alone battery charger requires no external microcontroller and features user-selectable termination, including C/10 or an onboard timer. The device's 1MHz fixed switching frequency enables small solution sizes. Float voltage feedback accuracy is specified at 0.5%, charge current accuracy is 5% and C/10 detection accuracy is 2.5%. Once charging is terminated, the LT3652HV automatically enters a low current standby mode, which reduces the input supply current to 85?A. In shutdown, the input bias current is reduced to 15?A. For autonomous charge control, an auto-recharge feature starts a new charging cycle if the battery voltage falls 2.5% below the programmed float voltage.

The LT3652HV is available in thermally enhanced packages: a low-profile (0.75mm) 12-pin 3mm x 3mm DFN package, and a 12-lead MSOP package. Both are available in E- and I- grade versions, guaranteed from -40C to 125C. Pricing starts at $3.40 and $3.70 each, respectively in 1,000-piece quantities.





Article Comments - 2A battery charger is solar-input co...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top