Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Networks
?
?
Networks??

ADIS16130 quick start guide and bias optimization tips

Posted: 14 Jun 2010 ?? ?Print Version ?Bookmark and Share

Keywords:quick start guide? ADIS16130 guide? bias optimization tips?

The ADIS16130 comes in a plastic housing that provides four mounting holes accommodating either M2 or 2-56 machine screws. This package enables both connector-up and connector-down mounting approaches. Figure 2 provides a mechanical diagram for a system using the connector-down approach. In comparison, the connector-up approach uses the same hole pattern for the four mounting screws but requires an additional cable/connector interface for electrical connection. The connector provides a standard, dual-row, 1mm pitch that offers many options for mating connectors. Figure 3 provides the suggested pad layout and hole pattern for the mating connector, assuming use of a connector from the Samtec CLM-112-02 family. The holes inside of the mounting pads prevent the pins on the ADIS16130 connector from bottoming out, which can cause mechanical stress and bias shifts.

View the PDF document for more information.

Click here to view related datasheets.





Article Comments - ADIS16130 quick start guide and bias...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top