Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Processors/DSPs
?
?
Processors/DSPs??

DAC features dynamic power control

Posted: 26 Jul 2010 ?? ?Print Version ?Bookmark and Share

Keywords:digital/analog converter? low-power IC?

There are ICs which are low-power by design, and then there are those which are low-power in operation, as demonstrated by the Analog Devices AD5755 quad-channel 16-bit voltage/current-out digital/analog converter (DAC). By incorporating dynamic power control, the DAC throttles it voltage and power to the load by sensing load impedance, thus reducing its own power dissipation and self-heating, and allowing four channels in a tiny package. The vendor maintains the result is that power needs are reduced by 80% while net thermal rise (silicon die temperature plus ambient temperature) is reduced by 75%, compared to available comparable products.

Basic DAC performance is not sacrificed in this design. The 16-bit resolution DAC has total unadjusted error is0.05%, and relative inaccuracy of 0.003% maximum, thus eschewing the need for system calibration. All associated functions are included on-chop, such as internal power converters, a 5- ppm/C reference, drivers, interfaces, and buffers, to reduce external component count to near zero while increasing reliability and mean time to failure (MTTF). For enhanced reliability, the ADC includes various self-test and reporting modes.

The AD5755 supports industry-standard Highway Addressable Remote Transducer (HART) protocol modems, and uses a 30MHz SPI port for processor interface. The output can be set to provide voltage or current output on the same pin. Current output ranges include 0-20, 4-20, or 0-24 mA, and output voltage range are 0-5, 0-10, 5, 10, 6, and 12 V. The IC is specified over a -40C to +105C temperature range.

The AD5755 is sampling now with full production in October 2010. It is available as a 99 mm, 64-lead LFCSP device, with prices starting at $11.56 (1000 pieces) depending on specific I/O version. Analog Devices also offers a full-scale evaluation board as well as a reference design complete with schematics, layout, and driver code.

- Bill Schweber
EE Times





Article Comments - DAC features dynamic power control
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top