Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Optoelectronics/Displays

GaN purification process could boost LED, transistor output

Posted: 28 Jan 2011 ?? ?Print Version ?Bookmark and Share

Keywords:gallium nitride purification process? GaN devices? LEDs? power transistors?

Researchers at the North Carolina State University (NCSU) have developed a new gallium nitride (GaN) process that purifies that high-energy material by removing up to 1,000 times as many defects as are typically present.

The NCSU inventors predict that LEDs, power transistors and other devices cast in GaN will be able to double their outputs by switching to the new process.

The process, invented by EE professor Salah Bedair and materials-science professor Nadia El-Masry, intentionally introduces voids into the GaN film near its interface with a sapphire substrate. As a result, the thousands of defects typically present are sucked into the voids thereby boosting the output of the devices using that purified film.

"The voids act like sinks for defects and dislocations near the interface, as well as acting as expansion joints for lattice mismatches," said Bedair. "We are in the process of measuring its affect on devices. Besides LEDs, we also believe that other GaN devices, like power transistors, could experience improved performance and reliability by using our process."

Bedair discovered the technique accidentally when his graduate student, Pavel Frajtag, complained that nanowires had formed in its bulk-grown GaN films when using a maskless inductively coupled plasma-reactive ion etching technique. Bedair asked him to get rid of the nanowires using epitaxial overgrowth, which resulted in the void formation and dislocation trapping effect that purified the film by 1,000x.

The GaN film tested was about 2?m thick with ellipsoid shaped voids of about 0.25?m in diameter surrounded by a film with 1,000x fewer defects. The voids themselves did not degrade the performance of the film, but on the contrary were estimated by the researchers to double its output.

Currently the researchers are characterizing the material further, as well as building LEDs and other devices with the process in order to prove its ability to boost GaN devices' outputs.

- R. Colin Johnson
EE Times

Article Comments - GaN purification process could boost...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top