Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Power/Alternative Energy
?
?
Power/Alternative Energy??

Voltage regulator supplies 1A output current

Posted: 07 Feb 2011 ?? ?Print Version ?Bookmark and Share

Keywords:voltage regulator? output current? Torex XC6602?

Torex Semiconductor Ltd has developed a 0.5V low input, 1A, ultra-low dropout voltage regulator with soft-start.

The new XC6602 series from Torex is a high-speed and accurate LDO, which can supply up to 1A of output current while consuming only 110?A. With the help of a bias voltage that can be set between 2.5V and 6.0V, the XC6602 operates with input voltages from 0.5V to 3.0V and is readily available with fixed output voltages from 0.5V to 1.8V in 0.1V increments.

XC6602 seriesThanks to its integrated N-ch driver transistor, the minimum input and output voltages of the XC6602 can be much lower than more traditional LDOs with their integrated P-ch transistors. Another advantage of the XC6602 integrated N-ch driver transistor is that it dramatically reduces the on-resistance at low output voltages, leading to dropout voltages as low as 162mV at 1A with VOUT = 1.2V (VBIAS = 3.3V). This makes the XC6602 suitable for low input/output voltage applications which require high output current and extended battery life.

With the XC6602, ceramic capacitors values as low as 1?F (VIN, VBIAS) and 2.2?F (VOUT) can be used, even with an output current of 1A. This can provide a very compact solution. Although the use of such small capacitor values contributes to lower the inrush current at startup, the built-in soft-start circuit (XC6602A only) makes sure that this inrush current is always kept under control, even under very high output current variations at startup.

In addition to its inrush current protection, the XC6602 comprises a combination of a current limiter circuit and a foldback short-circuit protection, as well as a thermal shutdown circuit that turns the N-ch driver transistor off when the junction temperature of the IC reaches 150C.

Other functionalities of the XC6602 include an enable pin that turns the IC on and off, a CL discharge function which quickly brings the output voltage down to VSS level when entering standby mode, and an undervoltage lock-out (UVLO) circuit, which makes sure that the voltage at the VBIAS and VIN pins are high enough to guarantee proper regulation of the output voltage.

The XC6602 is available in USP-6C package for applications that require both a small form factor and a good amount of power dissipation, in SOT-89-5 package for handling even higher power dissipations, and in SOT-26W package.





Article Comments - Voltage regulator supplies 1A output...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top