Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Manufacturing/Packaging

Fast-pulsing laser to improve solar cell efficiency

Posted: 14 Mar 2011 ?? ?Print Version ?Bookmark and Share

Keywords:pulsing laser? solar cell? laser scribing? microchannels?

High production costs and concerns over the efficiency of converting sunlight into an electric current are two of the major obstacles to wider solar cell adoption, says Yung Shin, a professor of mechanical engineering and director of Purdue University's Center for Laser-Based Manufacturing. Purdue University researchers are thus exploring a new manufacturing method that uses an ultra-fast pulsing laser in hopes of making solar cells more efficient and affordable.

Tiny "microchannels" are needed to interconnect a series of solar panels into an array capable of generating useable amounts of power, according to Shin. Conventional "scribing" methods that create the channels mechanically with a stylus are slow and expensive and produce imperfect channels, impeding solar cells' performance.

"Production costs of solar cells have been greatly reduced by making them out of thin films instead of wafers, but it is difficult to create high-quality microchannels in these thin films," Shin said. "The mechanical scribing methods in commercial use do not create high-quality, well-defined channels. Although laser scribing has been studied extensively, until now we haven't been able to precisely control lasers to accurately create the microchannels to the exacting specifications required."


Image of a microchannel created using an ultrafast-pulsing laser.
Source: Purdue University School of Mechanical Engineering (Yung Shin)

The researchers hope to increase efficiency while cutting cost significantly using an "ultrashort pulse laser" to create the microchannels in thin-film solar cells. "The efficiency of solar cells depends largely on how accurate your scribing of microchannels is," Shin said. "If they are made as accurately as possibly, efficiency goes up."

Research results have shown that the fast-pulsing laser accurately formed microchannels with precise depths and sharp boundaries. The laser pulses last only a matter of picoseconds, or quadrillionths of a second. Because the pulses are so fleeting, the laser does not cause heat damage to the thin film, removing material in precise patterns in a process called "cold ablation."

The process creates very clean microchannels on the surface of each layer, at a very high speed of several meters per second, which is not possible with a mechanical scribe. This is very tricky because the laser must be precisely controlled so that it penetrates only one layer of the thin film at a time, and the layers are extremely thin. But the ultra-fast pulsing laser offers very precise control of the depth, up to about 10-20nm.

The researchers plan to establish the scientific basis for the laser-ablation technique by the end of the three-year period. The work is funded through NSF Civil Mechanical and Manufacturing Innovation division.

- Julien Happich
??EE Times

Article Comments - Fast-pulsing laser to improve solar ...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top