Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > RF/Microwave

Using serial synchronous mode in CC110x and CC2500

Posted: 01 Apr 2011 ?? ?Print Version ?Bookmark and Share

Keywords:transceivers? synchronous mode?

Numerous applications require transferring data continuously over a wireless channel, where the source of the data can be information from some sensor, digitized audio data, etc., that needs to be transmitted continuously. In these applications, the CC110x (CC1100, CC1100E and CC1101) and CC2500 wireless transceivers and CC1150 and CC2550 RF-transmitters can be configured in serial synchronous mode, as described in this document.

In serial synchronous mode the data is transmitted or received serially over a two wire interface. This application note describes the register settings to configure the radio in serial synchronous mode and the considerations to minimize the packet error rate (PER) for continuous data streaming applications. The note concludes by providing example register settings for the configurations illustrated.

View the PDF document for more information.

Article Comments - Using serial synchronous mode in CC1...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top