Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

Tensilica releases DSP core for cellular basebands

Posted: 31 Mar 2011 ?? ?Print Version ?Bookmark and Share

Keywords:DSP cores? cellular baseband? Xtensa LX4?

Eyeing a larger share of the cellular baseband market, Tensilica Inc. recently launched an upgraded core designed for dataplane and DSP development. The Xtensa LX4 is capable of memory transfers of up to 1,024bits per cycle, 128bit VLIW instructions and cache memory pre-fetching.

The core design, which is currently available, can reach speeds of more than 1GHz in a high-performance 45nm process with an area of just 0.044mm2, Tensilica claims. The core is already being used in the company's recently launched ConnX BBE64 DSP for LTE Advanced cellular communications.

The LX4 is aimed at wired or wireless baseband processing, video pre- and post-processing, image signal processing and network packet processing functions. But cellular basebands represent the largest target, especially for high-end cores that can fill the needs of LTE services just starting to come on line.

To date, biggest rival Ceva Inc. commands as much as 90 percent of the business for licensed DSP cores in cellphone baseband processors, according to Will Strauss, principal of Forward Concepts. Ceva became the largest cellular baseband provider late last year, surpassing Qualcomm and others.

A handful of smaller players are also active, including Sweden's Coresonic which licensed its DSP cores to Mediatek in February.

"Tensilica believes its cores have lower power and a smaller footprint [than Ceva's cores], and Tensilica is supporting multiple cores rather than one big DSP which is the Ceva approach," said Strauss.

LX4

The new Xtensa LX4 is double the bit width of previous Xtensa cores.

Ceva currently supplies cores for Broadcom, China's Spreadtrum and the Infineon wireless group acquired by Intel, he said. DSP is a growing business for Tensilica with plenty of upside, Strauss added.

"Tensilica is making more revenues in DSP than RISC cores now, much of it going into cellular and audioand they are seeing a lot of uptake in baseband," said Strauss.

Tensilica has design wins in Fujitsu LTE products for DoCoMo's LTE service, which is just starting to ramp up. Verizon in the U.S. and Telia Sonora in Sweden also have launched LTE services only with external data modems for notebooks so far, but big launches of LTE handsets could begin as early as June, Strauss said.

So far, Samsung is leading the market for LTE chips used in dongles, said Strauss. But it's too early to pick winners and losers in the emerging market, he added.

The LX4 fills out Tensilica's DSP portfolio, which ranges from a GigaMAC/second product that fits into 0.01mm2 in a 28nm process to the ConnX, which achieves more than 100GigaMAC/s, the company claims.

The new core doubles the 64bit width of prior Xtensa instructions. It lets developers mix 64- and 128bit instructions without a switching penalty, the company said.

The new data pre-fetch option aims to reduce cycle counts in long-latency designs by fetching data from system memory ahead of its use. The technique is geared to accelerate streaming data from contiguous memory locations.

In tandem with the new core the company is rolling out a vectorization assistant tool to improve compiler performance of C-code when running on single instruction, multiple data DSPs. The tool explains what is preventing further vectorization so software developers can improve the source C-code to take advantage of the core's parallel execution units.





Article Comments - Tensilica releases DSP core for cell...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top