Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > T&M
?
?
T&M??

Contactor surpasses 4.5 mio insertions

Posted: 26 Apr 2011 ?? ?Print Version ?Bookmark and Share

Keywords:contactors? mio insertions? test setup?

Multitest claims that their ECON contactor has proven its superior cost of test as it recently exceeded 4.5 mio insertions at an Asian test house.

The customer was reportedly able to run a high-volume application with more than 100k throughput per day at an octal-site set-p for more than 1.5 years without contactor wear-related test cell downtime. In addition, the contactor performance resulted in a 99 percent stable test yield.

The ECON socket was launched for high-power applications of small size and small pitch devices (QFN). It is also available for SO, QFP and QFN packages with a lead pitches down to 0.25 mm.

Multitest's proprietary coatings is said to ensure long life spans and high first pass yields. The high first pass yields result from precise contact spring geometry and the use of a new type of plastic material that avoids thermal expansion. A high contact force of 0.45 N per spring ensures repeatable electrical behavior. Further, the ECON socket is load board compatible with existing RFC sockets and third-party socket types. It also supports plunge-to-board applications in the full ambient hot-cold temperature range.

In this actual test cell setup, the overall performance also benefitted from the Multitest Plug & Yield program. The customer used the ECON together with the Multitest MT9928 test handler. Plug & Yield represents the optimum harmonization of all test cell elements.





Article Comments - Contactor surpasses 4.5 mio insertio...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top