Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

Single-layer sensor delivers lower-cost capacitive touchscreens

Posted: 18 May 2011 ?? ?Print Version ?Bookmark and Share

Keywords:single layer enabling technology? TrueTouch touchscreen controllers? capacitive touchscreens?

Cypress Semiconductor Corp. will use the ongoing Society for Information Display conference in Los Angeles to launch and explain what it claims to be a true single layer enabling technology for its TrueTouch touchscreen controllers

Traditional capacitive touchscreens use a two-layer sensor to deliver the accuracy and linearity required for today's user experience. Cypress has developed proprietary algorithms that interface with a true single-layer sensor with no bridges to deliver two-layer performance for an unparalleled combination of user experience and cost sensitivity.

Available for glass and film, the removal of this second sensor layer can save mobile device manufacturers 30 percent or more on sensor costs.

According to John Carey, director of touchscreen marketing at Cypress, what has been described as single layer technology up until now has been based on a manufacturing technique that uses diamond and snowflake patterns, and requires a layer of insulator and an expensive bridge (see Figure 1).

insulator layer

Cypress says that even with only one sensor layer, the TrueTouch solution delivers accuracy better than 1.25mm, good SNRs, a response time of 80Hz and active power of 3.6mW.

column bridge

The technology is used in the Cypress CY8CTST241 (single-touch with one-finger gestures) and CY8CTST242 (adds limited two-finger gestures such as 'pinch' and 'zoom'), and delivers improved performance touchscreen accuracy of around 1mm and responsiveness with a true single-layer sensor panel, reducing the cost of the most expensive component of the touchscreen.

The controllers should enable manufacturers of handsets, cameras, GPS systems and other mobile systems to use capacitive touchscreens at lower resistive touchscreen costs.

Capacitive touchscreens' advantages over resistive touchscreens include a more intuitive user experience, better transmissivity, lower power, increased reliability and better durability. According to Carey, many lower-priced feature phones do not offer capacitive touchscreens today because of the cost. "The new TrueTouch single-layer sensor opens up new feature phones and lower-cost smartphones to capacitive touchscreens, especially in major markets such as China and India."

The controllers are suitable for screen sizes of 2.0 to 3.5 inches while multiple devices could be used for larger touchscreens, according to Carey. Cypress has a history of moving from multi-controller implementations to single-device solutions. The company's CY8CTMA884 is a single-chip tablet solution for touchscreens up to 11.6 inches.

The CY8CTST241 and CY8CTST242, which both provide QWERTY keyboard support, are available today for lead customers in QFN and CSP packages. The CSP measures 2.2mm x 2.32mm and has 30 balls. Active power is 3.6mW, low power current is 0.7mA, deep sleep current is 100nA and the refresh rate is 110Hz.

- Colin Holland
??EE Times





Article Comments - Single-layer sensor delivers lower-c...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top