Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

100V gate driver for enhancement-mode GaN FETs

Posted: 23 Jun 2011 ?? ?Print Version ?Bookmark and Share

Keywords:half-bridge gate driver? GaN FET? MOSFET?

National Semiconductor Corp. has launched what it claims as the industry's first 100V half-bridge gate driver optimized for use with enhancement-mode Gallium-Nitride (GaN) power field-effect transistors (FETs) in high-voltage power converters. National's new LM5113 is a highly-integrated, high-side and low-side GaN FET driver that reduces component count by 75 percent and shrinks printed circuit board (PCB) area by up to 85 percent compared to discrete driver designs.

Designers of power bricks and communications infrastructure equipment require high power efficiency in the smallest form factor. Enhancement-mode GaN FETs enable new levels of efficiency and power density compared to standard metal-oxide semiconductor field-effect transistors (MOSFETs) due to their low on-resistance (Rdson) and gate charge (Qg) as well as their ultra-small footprint, but driving them reliably presents significant new challenges. The LM5113 driver IC eliminates these challenges, enabling power designers to realize the benefits of GaN FETs in a variety of popular power topologies.

National's LM5113 is a 100V bridge driver for enhancement-mode GaN FETs. Using proprietary technology, the device regulates the high side floating bootstrap capacitor voltage at approximately 5.25V to optimally drive enhancement-mode GaN power FETs without exceeding the maximum gate-source voltage rating.

The LM5113 also features independent sink and source outputs for flexibility of the turn-on strength with respect to the turn-off strength. A low impedance pull down path of 0.5? provides a fast, reliable turn-off mechanism for the low threshold voltage enhancement-mode GaN power FETs, helping maximize efficiency in high-frequency power supply designs. The LM5113 features an integrated high-side bootstrap diode, further minimizing PCB real estate. The LM5113 also provides independent logic inputs for the high-side and low-side drivers, enabling flexibility for use in a variety of both isolated and non-isolated power supply topologies.

National's LM5113 is offered in a 10-pin 4x4 mm LLP package and cost $1.65 each in quantities of 1,000. Samples are available now and production quantities will be available in September.





Article Comments - 100V gate driver for enhancement-mod...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top