Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Amplifiers/Converters
?
?
Amplifiers/Converters??

SMD resistor handles 5每12W of power

Posted: 02 Sep 2011 ?? ?Print Version ?Bookmark and Share

Keywords:SMD? power resistor?

Stackpole unveils the HPC12, a high power handling SMD resistive device. It is rated for 5W of power in free air, but can handle 12W continuously with 400 LFM air movement on standard recommended solder pads with no heat sink needed.

The housing for the HPC12 provides outstanding heat transfer to the ambient air from the thick film element. The terminals are attached with high temperature solder and can withstand a full minute in a 300∼C bath with no degradation. In addition, the HPC12 can withstand surges of over 2000W for pulse durations of less than 10?s. "The HPC series offers a higher power rating than previously thought possible in an SMD device. It can be used with or without air movement and forces much less heat into the PCB compared to other power resistors of this size," stated Kory Schroeder, director of marketing, Stackpole.

The HPC12 is applicable for a wide variety of industrial and commercial power supply applications, motor controls, aircraft and aerospace, remote telecom and datacom power systems, test systems for power controls and power ICs, petroleum exploration equipment, and mining equipment, medical grade monitors, remote sensing, and wind measurement systems.

The HPC12 is available in tape and reel packaging in 200-pc quantities. Pricing varies with tolerance and resistance value and ranges from $1.20每$1.75 each in minimum quantities.





Article Comments - SMD resistor handles 5每12W of ...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top