Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Sensors/MEMS
?
?
Sensors/MEMS??

Sensor tech to simplify capacitive displays

Posted: 03 Nov 2011 ?? ?Print Version ?Bookmark and Share

Keywords:display module? capacitive display? touch panel industry?

Projected capacitive is considered the leading touch screen technology. A forecast suggests that in the coming years, reduction in sensor substrate layers will lead to simpler, thinner and lighter touch panels, according to the DisplaySearch Touch Panel Market Analysis.

"Two approaches are emerging to simplify projected capacitive sensor designs," said Jennifer Colegrove, VP of emerging display technologies for DisplaySearch. "One is sensor-on-cover and the other is in/on-cell."

In-cell and on-cell sensors are typically integrated during the display manufacturing process, whereas sensor-on-cover involves coordination between touch sensor and cover glass makers. While Apple products use glass-based sensors with ITO layers on both sides, most sensors use one or two layers of ITO on the same side of the glass. This is required for sensor-on-cover because the outer side is the exterior of the product.

As projected capacitive touch screen shipments grow by more than 100 percent YoY, cover glass has become a key component in touch screens. Regardless of the type usedsensor-on-cover or in/on-cellcover glass is a must for projected capacitive touch for both cosmetic and protection purposes. Cover glass finishing is very labor-intensive and, depending on the processes required and specifications, has yield rates in the 70 percent range. Process challenges will be an increasingly strategic issue for the industry. Depending on the technology and supply chain, cover glass finishers and touch module makers will be working together by contract or informal relationship, while tier-one touch module makers are integrating and expanding their in-house cover glass finishing capacities.

The touch screen supply chain is evolving differently in each region, based on variations in technologies and supply chain variables. Although sensor patterning and lamination processes are mostly automated, manpower is still necessary, especially for inspection. Japan, with high labor costs as well as a complex supply chain, tends to have the highest cost structure. China offers the lowest prices for mature mobile phone sensors and Taiwan has lower prices for tablet sensors. This is due to greater availability of glass and better access to Gen 4.5 and larger equipment for sensor deposition and photolithography.

For popular tablet sizes (9.7in and 10.1in), average selling prices (ASPs) per unit are in the range of $1-$1.50/in. However, DisplaySearch anticipates ASPs will fall as popularity increases. ASPs of regular notebook sizes (>11.6in) are still higher due to challenges in scaling production.

Curved or shaped cover glassreferred to as 2.5D if along one axis and 3D if along both axesis a new design trend. Many touch-enabled smartphones look very similar, so brands are looking to use curved cover glass to differentiate their products. Due to its more complicated processes and costs, DisplaySearch expects curved cover glass to be used primarily in high-end models.

While touch module makers are likely to outsource larger-sized sensors if volumes increase, DisplaySearch expects tier-one touch module makers to integrate cover glass finishing because it is critical for sensor-on-cover production and for decreasing substrate weight and thickness.

Moving into the holiday season, DisplaySearch forecasts that the tablet market will be increasingly important for the touch panel industry, particularly as lower-priced products, such as the Amazon Kindle Fire, enter the market.

- Julien Happich
??EE Times





Article Comments - Sensor tech to simplify capacitive d...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top