Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

DC/DC controller touts 95% efficiency at 2MHz

Posted: 24 Jan 2012 ?? ?Print Version ?Bookmark and Share

Keywords:DC/DC controller? MOSFET? LDO?

Linear Technology Corp. has unleashed a high frequency controlled on-time single output dual phase synchronous step-down DC/DC controller that the company claims to achieve up to 95 percent efficiency with a 25A output when operating at 2MHz. The LTC3839 has an operating frequency selectable from 200kHz to 2MHz or can be synchronized to an external clock, added Linear Tech.

A 30ns minimum on-time allows for a high step-down ratio at very high operating frequencies. The controlled on-time, valley current-mode architecture and Detect Transient Release feature provide very fast transient response by increasing operating frequency during a transient event, enabling the output voltage to recover in only a few clock cycles, noted Linear Tech. Up to 12 phases can be paralleled and clocked out of phase for high current applications (up to 250A).

The LTC3839 operates from 4.5-38V input voltage, encompassing various applications including most intermediate bus voltages. Strong onboard N-channel MOSFET gate drivers allow the use of high power external MOSFETs for output currents up to 50A, at output voltages ranging from 0.6V to 5.5V, making the device ideal for point-of-load requirements.

LTC3839

The LTC3839 operates from 4.5-38V input voltage range.

The LTC3839's differential amplifier provides true remote output voltage sensing of both the positive and negative terminals, enabling high accuracy regulation independent of PCB IR losses (up to 500mV). The output current is monitored by sensing the voltage drop across the output inductor (DCR) for highest efficiency or by using a sense resistor for extra precision. Additional features include an onboard bias voltage LDO, soft-start or tracking, adjustable current limit, overvoltage protection, current limit foldback and external VCC control.

The LTC3839 offers superior total regulation accuracy and is specified to account for all error sources including line, load and differential sensing. The LTC3839 total output voltage accuracy is 0.25 percent at 25C, 0.67 percent from 0�C to 85�C, and 1 percent maximum DC error over the full -40C to 125C operating junction temperature range. The LTC3839 is available in a thermally enhanced 5 x 5mm QFN-32 package. The 1,000-piece price starts at $3.18 each.

Click the dragon to see its flame

There are 11 dragons hidden this week's articles. Collect the words in their flames to form a message!

You have the weekend to figure it out. We'll publish the answer in next Monday's news blast.





Article Comments - DC/DC controller touts 95% efficienc...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top