Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Sensors/MEMS

Research rolls sensors that detect corrosion in concrete

Posted: 31 Jan 2012 ?? ?Print Version ?Bookmark and Share

Keywords:corrosion sensor? alkaline level? concrete?

Researchers from the City University London and Queen's University Belfast have created a type of sensor that they touted will increase the ability to detect early warning signs of corrosion in concrete. According to them, the devices are more resilient and durable than traditional corrosion sensors. They can monitor the safety of structures such as bridges and vital coastal defenses where carbon steel bars used to reinforce submerged concrete in tidal zone areas and are at risk of corrosion caused by wet conditions, they added.

The sensors can withstand long-term placement within concreteunlike any equivalent sensors currently availablethey can constantly monitor conditions, enabling a warning to be sent when conditions for corrosion threshold have been crossed. Notifications can be sent in the form of an email or text to the structure's maintenance team.

A trio of novel, robust probes is at the heart of the team's work: one that monitors temperature, one for humidity while the other senses chloride and pH levels, noted the researchers. Changes in these factors indicate the onset of the potentially destructive corrosion. Within the probes are advanced optical sensors specifically designed and built for this project in City's laboratories. These have been patented for potential commercial exploitation.

"Key to this successful prototype is our monitoring the variation of the sensor signals of a sample as an indicator of corrosion levels, said Tong Sun, professor of sensor engineering at City and principal investigator on the project. "This means we can use optical sensors made of polymer, which is much more resistant to the high alkaline environments of these structures than sensors currently on the market."

Traditional optical corrosion sensors have only a limited lifetime, usually of several weeks, because of the corrosive alkaline levels within concrete. The new sensors are expected to last for several years, with proper protection, even where pH levels are higher than 12. For comparison, domestic bleach has a pH value of between 12 and 13.

"Our design means several probes can be installed semi-permanently in a structure and then connected to a computer data logger, which will constantly collect readings. This can be left until the readings indicate conditions have changed enough to warrant a full investigation. Remedial work will be simpler, cheaper and more effective at this stage, rather than waiting until there is visible damage, such as parts of the concrete coming away," explained Sun.

The sensors within the temperature and humidity probe use the fiber Bragg grating. It is a type of reflector made of a length of optical fiber that only reflects specific wavelengths of light while transmitting all others. This is created, usually by UV laser treatment that alters the fiber core's refractive index. A pair of gratings, with one being coated with a polymer layer, was used to separate the temperature and humidity parameters.

The sensors inside the chloride/pH probe are capable of measuring free chloride concentrations as low as 20 millimoles per liter.

- Paul Buckley
??EE Times

Article Comments - Research rolls sensors that detect c...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top