Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Power/Alternative Energy
?
?
Power/Alternative Energy??

Single resistor buck regulator touts 4-15V range

Posted: 16 Feb 2012 ?? ?Print Version ?Bookmark and Share

Keywords:buck regulator? switching regulator? resistor?

Linear Technology Corp. has unleashed a 1.5A synchronous buck regulator that can be paralleled for higher current applications and is adjustable down to 0V. The LTC3600 has an architecture that uses a 50?A current reference, combined with a single resistor to set the output voltage. According to the company, the product's design enables easy current sharing among multiple regulators, setting the output voltage for all of the regulators with a single external resistor.

The switching regulator's input voltage capability ranges from 4-15V, making it ideal for dual-cell li-ion applications, as well as fixed 5V and 12V intermediate bus systems. The LTC3600 offers synchronous rectification with efficiencies as high as 96 percent and a design that allows dynamic adjustment of output voltage from 0V to VIN-0.5V, offering virtually rail-to-rail performance, stated Linear Tech.

LTC3600

The LTC3600 uses a 50?A current reference.

The device's ability to provide zero output enables it to power down individual rails in the system as needed. Its on-chip trimmed reference achieves accuracy of 1 percent, noted the company. Furthermore, output regulation and transient response are independent of output voltage. Output voltage tracking or soft start is easily programmed via the ISET pin for applications that require power sequencing.

The LTC3600's VIN and VOUT capability, tight line and load regulation, high efficiency, low external parts count and parallel capability make it ideal for modern multirail systems, Linear Tech indicated. The device's 200kHz to 4MHz switching capability enable use of tiny, low cost capacitors and inductors. Additional features include a power good voltage monitor, external synchronization capability and thermal protection.

The LTC3600EDD is available in a 3 x 3mm DFN-12, and the LTC3600EMSE is offered in a 12-lead, thermally enhanced MSOP package. Pricing for both package options starts at $2.80 each in 1,000-piece quantities. Industrial grade versions, the LTC3600IDD and LTC3600IMSE, are guaranteed to operate from -40C to 125C operating junction temperature and are priced at $3.22 each in 1,000-piece quantities. All versions are available from stock.





Article Comments - Single resistor buck regulator touts...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top