Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

Research scales RFID for use in retail apps

Posted: 27 Feb 2012 ?? ?Print Version ?Bookmark and Share

Keywords:thin-film technology? RFID? reader-talks-first?

Imec, Holst Center and their partners have created what they claim as the world's first RFID chip made in low-temperature thin-film technology that allows reader-talks-first communication. They believe the technology has remarkable applications in the retail industry where the tags are less costly but are powerful enough to be used as intelligent item-level tags on the packaging of consumer goods.

Thin-film RFID chips are made on plastic foil, with organic or oxide thin-film semiconductors. Until now, RFID tags with such thin-film chips on plastic were based on a tag-talks-first principle: as soon as the RFID tag gets powered from the RF field of the RFID reader, it transmits its code to the reader. But in retail applications, many tags will try to contact the reader at the same time, requiring an effective anti-collision mechanism. Such a scheme has never before been implemented. Tag-talks-first RFID anti-collision measures have been limited to about maximum four tags and come at the cost of a slow reading time.

RFID tag

Up-link decoder chip enabling bi-directional communication in RFID tags, realized using a hybrid organic/solution-processed metal-oxide technology

"With this technology, we are for the first time able to realize a reader-talks-first low-temperature thin-film transistor (TFT) RFID circuit. When the RFID reader first powers and contacts the tag, it transmits a clock and identification data. The tag then uses this data and clock to determine when to send its code. This mechanism for the first time allows implementing a practical anti-collision scheme for thin-film RFID tags,"�said Paul Heremans, Imec director.

For this RFID tag, a complementary hybrid organic-oxide technology was used, combining a 250C solution-processed n-type metal-oxide TFT with typical charge carrier mobility of 2cm2/Vs with a pentacene p-type TFT with mobility of up to 1cm2/Vs. A high-k Al2O3 dielectric was used, which increases the transistors' current drive.

Thin-film electronics are circuits that are made up of organic and metal-oxide molecules. They have the potential to be produced very cheaply, with print-like processes on thin plastic sheets. One of the driving forces of this industry is the ambition to create intelligent RFID tags that are at the same time intelligent enough and cheap enough to be printed and used on mass-produced retail products.





Article Comments - Research scales RFID for use in reta...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top