Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Embedded
?
?
Embedded??

Integrate LM25066 into Intel Node Manager 1.5 System

Posted: 04 Apr 2012 ?? ?Print Version ?Bookmark and Share

Keywords:data centers? servers? hot-swap controller?

One of the most significant concerns in today's data centers is increasing the power efficiency of servers. This requirement is driving system developers to make it possible to monitor and control power from the ac source to the power supply to the blade and beyond. The LM25066 hot-swap controller with telemetry is suited for many of these areas.

This application note was written to help developers integrate hot-swap capability into Node Manager 1.5 compliant systems that have limited support for PMBus enabled hot-swap controllers. Although the LM25066 hot-swap controller has telemetric functionality beyond that required for Node Manager 1.5, there are a number of adaptations that the Baseboard Management Controller (BMC) of the blade must perform in order for the LM25066 telemetry to comply fully with Node Manager 1.5. This paper outlines the known PMBus command implementation issues that need to be addressed in order to use the LM25066 in a Node Manager 1.5 environment.

View the PDF document for more information.

Originally published by National Semiconductor at www.national.com as "Using the LM25066 in an Intel Node Manager 1.5 System".





Article Comments - Integrate LM25066 into Intel Node Ma...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top