Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Manufacturing/Packaging

Report: TSMC heading to New York

Posted: 26 Nov 2012 ?? ?Print Version ?Bookmark and Share

Keywords:production facility? 450mm? wafer fab?

Evidence is starting to mount that foundry chip maker Taiwan Semiconductor Manufacturing Co. could be about to follow Globalfoundries in building a wafer fab in up-state New York.

If negotiations play out it could be one of the first commercial-scale wafer fabs set down ready to manufacture on 450mm diameter wafers whenever that transition should come. And it could be set down next door to Globalfoundries' Fab 8 in the Luther Forest Technology Campus in Saratoga County, one of the sites under consideration.

Reports have been circulating through November that a major semiconductor company has retained consulting firm Deloitte Touche Tohmatsu Ltd. to find a location for a 3.2 million square foot production facility.

Operating under the codename Project Azalea Deloitte has reportedly considered sites multiple sites in upstate New York as well as possibilities in California and Texas. The facility is expected create about 1,000 jobs adding to the speculation that this is a multi-billion dollar, leading-edge wafer fab, which restricts the list of possible companies. The location is expected to be selected before the end of 2012 and land negotiations concluded by the end of February 2013.

This has been put together with reports that U.S. congressman Bill Owens, representative for New York, visited TSMC in December 2011, which at the time prompted speculation that TSMC was considering building a wafer fab in the New York area.

Globalfoundries is already on the ground there; Intel already has multiple centres away from New York; Samsung has its U.S. manufacturing focus in Austin Texas, and so circumstantial evidence is starting to point to TSMC as the likely owner of Project Azalea.

And even though TSMC has always been a strong advocate of clustering its fabs together at campus sites in Taiwan, such a move would make sense because New York state has become a centre of excellence for nanoelectronics, extreme ultraviolet lithography and is the global centre for pioneering the technology around 450-mm diameter wafers. In additon, having a leading-edge manufacturing site in the United States would not hurt TSMC's efforts to take the manufacturing of processors for Apple away from rival Samsung.

As well as being the manufacturing location for IBM and Globalfoundries, New York hosts the College of Nanoscale Science and Engineering (CNSE) at the University of Albany. Perhaps more significantly the Global 450 Consortium (G450C) was established in 2011 at CNSE's Albany NanoTech Campus. G450C comprises the five leading chip companies with an interest in the next-generation wafer production; IBM, Intel, Globalfoundries, Samsung and TSMC.

There is a high degree of uncertainty about the introduction of 450-mm wafer production by TSMC or at any other semiconductor manufacturer with estimates varying from 2015 to 2018. That does, perhaps raise the possibility of consortium-owned 450-mm wafer fab being set down in New York, but in general the semiconductor industry finds it hard to work in this way in the competitive commercial world.

And it is interesting to note that in Chinese culture the Azalea is known as the "thinking-of-home" bush.

- Peter Clarke
??EE Times

Article Comments - Report: TSMC heading to New York
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top