Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

Contactless smart card follows ISO/IEC15693, ISO/IEC14443A

Posted: 28 Feb 2013 ?? ?Print Version ?Bookmark and Share

Keywords:EM Microelectronic? Smart Card?

The Swatch Group's semiconductor arm EM Microelectronic has recently unveiled a new generation, low power Contactless Smart Card. The EM4333 is designed to fulfil the specific needs of secure access control, public transportation, loyalty cards, electronic door locks or leisure park applications.

The smart card boasts a dual ISO/IEC14443A and ISO/IEC15693 compliant transponder enables to merge vicinity and proximity applications on the same media card using the same antenna and offering the maximum of RF performances.

The EM4333 implements an enhanced auto-detection mechanism enabling to distinguish whether a command sent by the RFID reader is following ISO/IEC15693 or ISO/IEC14443A protocol. The circuit's low power consumption allows operating in field strengths down to 0.05A/m for ISO/IEC15693 and 0.5A/m for the ISO/IEC14443A interface. An embedded accurate field strength detector ensures that the ISO/IEC14443 part is powered only in strong field conditions thus ensuring the range of ISO/IEC15693 is not affected by the high speed ISO/IEC14443A mode.

The vicinity interface VICC supports all modes specified by the ISO/IEC15693-2/3 standards, including all mandatory, most optional, and in addition a number of custom commands. The ISO/IEC15693 communication channel provides security based on Grain 128A, a public stream cipher which uses 128bit keys, supports three pass mutual authentication, secure messaging and message authentication code (MAC).

The proximity RF interface is configurable by software and supports ISO/IEC 14443A with data transfer rates up to 848k bps. The ISO/IEC14443A is operated by a 8051 CPU providing full flexibility given by customer operating software. The core offers AES-128, DES/3-DES and DMA coprocessors.

The CPU is software compatible with the industry standard 8051 8bit microprocessor, to guarantee the maximum reuse of software. The hardware implementation of the core is a modern design not relying on microcode.

The device offers 4 kilobytes of user data EEPROM that can be shared between ISO/IEC15693 and ISO/IEC14443A. Both protocols can access the same data from different applications. The chip also offers 64 kilobytes of code EEPROM to host the Operating System and any data that does not require regular updating (e.g. pictures), accessible through ISO/IEC14443A protocol.

Powerful development tools are fully integrated into Keil's?Vision3/4 environment providing an efficient and user friendly development platform. An EMX43 emulator with RF extension allows fast and efficient development and debugging directly in the customer application.

EM Microelectronic delivers a Low Level Library of code samples, which supports all transport layers of ISO14443-3/4 in Type A. The library functions allow easy and fast porting of customer software to the device.

The EM4333 circuit is available from EM Microelectronic and its authorised distributors.

Further information about this circuit can be found at www.emmicroelectronic.com.





Article Comments - Contactless smart card follows ISO/I...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top