Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

Green Peak's radio chip touts Wi-Fi, ZigBee coexistence

Posted: 28 Mar 2013 ?? ?Print Version ?Bookmark and Share

Keywords:GreenPeak? ZigBee? transceivers? Wi-Fi? 2.4GHz?

RF communication specialist GreenPeak Technologies has recently unveiled a new generation of ZigBee transceivers. The GP501 transceiver contains a sophisticated coexistence scheme that allows Wi-Fi, Bluetooth and ZigBee chips to work side by side in the same device.

The GP501 also contains Deep Packet Inspection allowing deep sleep modes of set-top boxes and other host devices by means of Wake-on-LAN messages. ZigBee shares the 2.4GHz frequency band with other Wi-Fi equipment. The GP501 has a coexistence interface to allow optimised and co-located ZigBee/Wi-Fi radios to work in the same device, successfully avoiding RF interference when operating simultaneously. This coexistence interface enables arbitration over the shared radio frequency medium to prevent contention, signal degradation and data loss.

Another advantage of the GP501 is its small size. Coming in a 32-pin 5x5mm2 footprint, GreenPeak's latest ZigBee transceiver allows integration into even the smallest product form-factors.

ZigBee transceivers

GreenPeak's GP501 transceiver.

"The Wi-Fi Coexistence Interface and Deep Packet Inspection enabling Wake-on-LAN are new and exciting features of the GP501", says Cees Links, CEO of GreenPeak Technologies "These features make the GP501 the optimal choice for the set-top box/gateway market. With its small 32-pin footprint, the GP501 is a great successor to the already very successful GP500. Once again GreenPeak is leading the industry in adding smart functionality and superior performance to its ZigBee devices."

A new key feature of the GP501 ZigBee transceiver chip is the Deep Packet Inspection for ZigBee applications. Deep Packet Inspection (DPI) enables advanced packet management, allowing the host processor to go into a deep-sleep mode to conserve power. While most other ZigBee transceiver chips only include a superficial inspection of the MAC and PHY headers, the GP501 looks beyond these layers and executes a Deep Packet Inspection and based on the outcome, the chip can decide if the packet has to be passed on to the higher layer application or can be ignored. The DPI engine is also security aware, blocking unauthorised packets without involving the host processor and ensuring the system does not waste energy analysing non-compliant packets. The DPI feature can be used for Wake-on-LAN functionality, where ultra-low power ZigBee is used to wake up the main processor from its sleep mode to enable Wi-Fi networking.





Article Comments - Green Peak's radio chip touts Wi-Fi,...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top