Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Manufacturing/Packaging
?
?
Manufacturing/Packaging??

SanDisk will only switch to EUV for ReRAM

Posted: 09 Apr 2013 ?? ?Print Version ?Bookmark and Share

Keywords:SanDisk? EUV? lithography? NAND?

Until it begins manufacturing resistive RAM (ReRAM) sometime in the second half of this decade, memory supplier SanDisk does not expect use extreme ultraviolet (EUV) lithography.

Judy Bruner, SanDisk's chief financial officer, addressed the question at a Morgan-Stanley financial event late February provided an outline of the expected transition of memory types coming at SanDisk.

When asked if SanDisk could avoid involvement with the much-delayed EUV lithography because the company would be moving to vertically-stacked memory structures Bruner said: "We'd like to use EUV at some point, but we don't think we need EUV for three-dimensional NAND or what we refer to as BiCS (bit cost scalable). So we view BiCS as a mid-term technology after we get through planar NAND."

Bruner then said that the three would be two more nodes of planar NAND production above 10nm minimum geometry that would be ramped up before the move to 3D structures. The 1Y-node would ramp in the second half of 2013 and would be followed by a 1Z-node that could start very late in 2014 and ramp during 2015. After that memory production would likely to go to 3D NAND.

"We believe we would go to three-dimensional NAND or BiCS and won't need EUV for that. But when we get to 3D resistive RAM, then we do believe we will need EUV. So it's several years out before we would require EUV," concluded Bruner.

Bruner's questioner interpreted that to mean 2017 or 2018. Bruner qualified that by saying: "Sometime in the second half of this decade."

- Peter Clarke
??EE Times





Article Comments - SanDisk will only switch to EUV for ...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top