Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Networks
?
?
Networks??

3U VPX Ethernet switches, routers tweaked for Cisco tech

Posted: 25 Jun 2013 ?? ?Print Version ?Bookmark and Share

Keywords:Extreme Engineering Solutions? 3U? VPX switches? routers? Ethernet?

Extreme Engineering Solutions (X-ES) recently launched its XChange3013 and XChange3018 3U VPX switches and routers. The company's latest releases aim to provide versatile management and routing options, ranging from managed or unmanaged Layer 2 switching to fully featured IP routers with Cisco IOS and Cisco Mobile Ready Net technology.

The XChange3018 is the first VPX Ethernet switch to support 10 Gigabit Ethernet using the 10GBASE-T protocol, eliminating the need for costly 10 Gigabit optical transceivers.Both the XChange3013 and XChange3018 deliver full wire speed across all of their ports and jumbo packets up to 13KB. They also support IPv6, Quality of Service (QoS), Energy Efficient Ethernet (EEE), and a comprehensive set of IETF RFCs and IEEE protocols.

The devices also include an XMC site that is compatible with the XPedite5205, which implements Cisco IOS IP Routing capabilities and provides a complete Embedded Services Router (ESR) solution. The XChange3013 supports up to twenty Gigabit Ethernet ports, including fourteen 10/100/1000BASE-T ports and six 1000BASE-X SerDes ports. The XChange3018 supports up to four 10 Gigabit Ethernet ports, which are configurable as either 10GBASE-T or XAUI, as well as twelve Gigabit Ethernet ports divided into six 10/100/1000BASE-T ports and six 1000BASE-X SerDes ports.

The XChange3013 and XChange3018 can be managed through SNMP, as well as with an industry-standard CLI via their serial ports, telnet, or SSH. When configured as a fully managed Layer 2 switch, support for features such as fast boot, flow control, MAC bridging (IEEE 802.1D), port mirroring, port authentication (IEEE 802.1x), VLANs (IEEE 802.1Q), GVRP, MVRP, port and protocol classification (IEEE 802.1v), GARP, MRP, GMRP, MMRP, LACP, RMON, STP, RSTP, MSTP, RPVST+, AgentX, and IGMP are included. When configured as a Layer 3 router, support for Multicast and Unicast Routing features such as DVMRP, IGMP, PIM-DM, PIM-SM, PIM-SSM, MLD, RIP, BGP, OSPFv2/OSPFv3, and VRRP are added.

When paired with the XPedite5205, the XChange3013 and XChange3018 include Cisco IOS IP routing and Cisco Mobile Ready Net capabilities. With this technology, the router provides highly secure data, voice, and video communications to stationary and mobile network nodes across both wired and wireless links. Cisco Mobile Ready Net also includes support for mobile ad hoc networking and radio-aware routing. With the XPedite5205, Cisco IOS security features are also supported, including hardware encryption, firewalls with integrated threat control, zone-based firewalls, Intrusion Prevention System (IPS), content filtering, identity management using Authentication, Authorisation, and Accounting (AAA), and Public Key Infrastructure (PKI).

The datasheets to X-ES' latest products can be downloaded below.

  • XChange3013
  • XChange3018




  • Article Comments - 3U VPX Ethernet switches, routers tw...
    Comments:??
    *? You can enter [0] more charecters.
    *Verify code:
    ?
    ?
    Webinars

    Seminars

    Visit Asia Webinars to learn about the latest in technology and get practical design tips.

    ?
    ?
    Back to Top