Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Power/Alternative Energy
Power/Alternative Energy??

Change in polymer structure improves solar cell efficiency

Posted: 29 Jul 2013 ?? ?Print Version ?Bookmark and Share

Keywords:solar cell? PNNT-DT? power conversion efficiency?

According to researchers from Emergent Molecular Function Research Group at the RIKEN Centre for Emergent Matter Science, solar cells based on organic polymers are of great interest because the materials are both cheaper to make and easier to process than those used in traditional inorganic solar cells. However, the very best power conversion efficiencies for polymer solar cells as of the present remain below the threshold for practical application.

Itaru Osaka and co-workers have discovered that changing the polymer's structure results in a significant enhancement of power conversion efficiency. When light energy is absorbed by the polymer in a polymer solar cell, electrons are excited to higher energy levels to produce a high-energy electron and a corresponding electron 'hole'. To convert the light energy into electrical current, these electrons and holes have to move through the polymer to the electrodes before they recombine and the energy is lost. Much research has been devoted to understanding how to improve this conversion process.

Osaka and his colleagues had been working with a particular type of copolymer containing a repeating naphthodithiopheneCnaphthobisthiadiazole structure called PNNT-DT. "PNNT-DT has very low solubility," said Osaka, "so we were interested in attaching additional alkyl side chains to the polymer to improve its processability." As expected, this modification significantly improved the solubility of the polymer, but also significantly and unexpectedly improved the power conversion efficiencies of solar cells made with the polymer.

In the solar cells, the polymer is deposited as a thin film, and analysis revealed that these new 'alkylated' polymers were arranged so that the polymer chains lay flat in stacks on the surface rather than aligned perpendicular to it. This causes the charge carrierselectrons and holesto move perpendicular to the surface rather than parallel, improving the power conversion efficiency. "This unexpected change in orientation produced solar cells with an efficiency of up to 8.2 per cent compared with just 5.5 per cent for the unalkylated material," added Osaka.

Ultimately, Osaka and his co-workers hope to exploit this dramatic efficiency enhancement in other polymers in order to move closer to producing polymer solar cells that can truly compete with the 15 per cent or greater efficiency of inorganic solar cells. "We need a greater understanding of why this switch in polymer orientation occurs, and then we need to apply it to other polymers that can absorb a wider range of visible light wavelengths," he noted.

Article Comments - Change in polymer structure improves...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top