Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Manufacturing/Packaging
?
?
Manufacturing/Packaging??

Imec, Entegris team up on 3D wafer handling

Posted: 30 Aug 2013 ?? ?Print Version ?Bookmark and Share

Keywords:3D wafer handling? smartphone? tablets? 3D IC?

Entegris Inc. and Imec have joined forces to advance the development and broaden the adoption of 3D ICs. 3D IC technology, a process by which multiple semiconductor dies are stacked into a single device, is aimed at increasing the functionality and performance of next-generation ICs while reducing footprint and power consumption. The technology enables the next generation of portable electronics such as smartphones and tablets that require smaller ICs which consume less power, the organisations indicated.

One of the key steps in 3D IC manufacturing process entails thinning semiconductor wafers while they are bonded to carrier substrates. Handling such thinned 3D IC wafers during the production process can result in wafer breakage, edge damage and particle generation. A standardised, fully automated solution that supports the handling of multiple types of wafers would result in a significant cost reduction and pave the way towards further development and scaling of 3D IC technologies. Imec and Entegris are working on creating a solution to safely transfer and handle multiple kinds of 3D IC wafers without the risk of breakage and other damage that may occur during the 3D production process.

"We are excited to work with the Imec team, which is a key research centre leading technology innovation for the semiconductor industry," said Bertrand Loy, president and CEO of Entegris. "Our current collaboration is aimed at leveraging our wafer handling expertise and technology to reduce contamination and breakage by applying full automation to the handling of thin wafers during 3D wafer production. This project builds on our previously completed work with Imec to develop dispense and filtration methods to reduce bubble and defect formation during the dispense of material that is used to temporarily bond 3D wafers to carrier substrates," said Loy.

"This collaboration with Entegris aims at developing a solution towards fully automated handling of multiple types of 3D IC wafers," stated Eric Beyne, director of Imec's 3D integration research programme. "Such a general solution would imply a significant reduction of the development cost, which is key to the realisation of a scalable and manufacturable 3D IC technology."





Article Comments - Imec, Entegris team up on 3D wafer h...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top