Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > RF/Microwave

WiFi preps for 900MHz spectrum, to debut by start of 2015

Posted: 04 Sep 2013 ?? ?Print Version ?Bookmark and Share

Keywords:WiFi? Zigbee? Z-wave? Internet of Things? Qualcomm?

In an effort to compete in cost and range with a fragmented set of options in home and building automation and the Internet of Things, WiFi has begun preparations to ride the 900MHz spectrum bands. Chips and systems using the forthcoming IEEE 802.11ah standard are expected to come out by the beginning of 2015.

The effort makes sense for the standard that is the most broadly used form of wireless local-area networking. However, it represents a reach for a sector already embracing 60GHz for in-room multimedia and is no slam dunk against a dozen well-established options already optimised for building and home automation such as Zigbee and Z-wave.

A first vote on the .11ah standard could come as early as the end of September, although a final standard is not expected until January 2016. That makes 2014 the time frame for development of new silicon for end nodes and access points.

A host of companies have been working on the .11ah spec led by a Qualcomm engineer who chairs the group. Other participants come from companies including Broadcom, Huawei, Intel, LG, Marvell, NEC, Samsung, and ZTE.

The spec aims to support a range of options from throughput of 150Kbit/s with a 1MHz band to as much as 40Mbit/s over an 8MHz band. Distances supported could be about 50 per cent longer than those of the streamlined 802.11n products now targeting the sector with throughput up to 72Mbit/s.

The so-called sub-GHz standard is "the next big thing" on the WiFi road map, Adam Lapede, a senior director of product management at Qualcomm Atheros, said in an interview. "It gives you the simplification of not worrying about these other networks because you will have one radio and one router to cover all the use cases you need."

As many as a dozen 900MHz protocols are now crowded into the space of building and home control networks. "That's the biggest problemyou need separate hubs or base stations for each of them, and that means extra costs, and if you add IP to these devices there are more costs," he said.

The .11ah standard is expected to cover many modest home uses at 10-20Mbit/s. It will also help WiFi vendors extend into large building networks supporting up to 8,000 connections, he said.

Existing 900MHz nets are not sitting idle. Many have added 2.4GHz support for higher throughput, and many, including Zigbee, have added Internet Protocol capabilities.

- Rick Merritt
??EE Times

Article Comments - WiFi preps for 900MHz spectrum, to d...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top