Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > T&M
?
?
T&M??

JTAG Technologies expands boundary-scan testers

Posted: 19 Nov 2013 ?? ?Print Version ?Bookmark and Share

Keywords:JTAG Technologies? boundary-scan tester? PCB assembly? system testing?

JTAG Technologies has extended its line of boundary-scan controller hardware for PCB assembly and system testing, the JT 5705 series. According to the firm, the design concept incorporates both JTAG/boundary-scan controller functions and mixed-signal I/O channels. Extensive input protection is provided to ensure high levels of in-service reliability and low maintenance, while connection to the tester is via a USB interface, stated the firm.

The first in the series, JT 5705/USB, is supplied as desktop instrument, primarily aimed at hardware validation applications in design, small-scale production test and in some cases field service and repair. The JT 5705/USB features two 15MHz TAPs and 64 I/O's available through 0.1in IDC connectors. Fifty-six of the I/O channels are always digital, 16 of which also feature a frequency function. The remaining eight channels can be used as either digital I/O or analog I/O. The unit also contains a user programmable FPGA, facilitating application-specific digital I/O options. Via the built-in 'Multi-Sync' feature several JT 5705/USBs can be combined into a single JTAG controller providing multiple TAPs and hundreds of I/Os.

boundary-scan tester

The second model in JTAG's portfolio is the larger JT 5705/RMI, a 1U high 19in rack-mountable instrument for use in systems or as a bench-top tester. This unit features four 15MHz TAPs and 4 groups of 64 mixed-signal I/O channels providing a total of 256 I/O's available through 0.1in IDC connectors. As before, within each 64 channels group, 56 channels are permanently digital with 16 available as frequency inputs. The remaining eight channels of each group can be individually programmed as digital I/O or analog I/O channel. Furthermore the JT 5705/RMI features a total of four user programmable FPGA's for creating application specific digital I/O options.

The I/O capabilities as provided by the JT 5705/USB are also available in a separate I/O module, the JT 5112 Mixed-signal I/O scan module, or MIOS. The MIOS module can be used in combination with existing JTAG Technologies boundary-scan controllers such as JT 3705, JT 3710 and JT 37x7 adding analog I/O capabilities to those controllers.

As the boundary-scan market expands beyond traditional high-density digital targets seen in Mil/Aero and telecoms and automotive applications. In this context, JTAG expects to see particular high demand for in-car electronic control units, many ECUs require an analog/sensor stimulus that registers back to a microprocessor where the values can be checked using boundary-scan or JTAG emulative test methods. To meet such requirements, the test equipment must evolve accordingly. As well as supporting multiple JTAG (IEEE 1149.x) compatible TAPs with programmable thresholds the units have extensive mixed-signal I/O capability with a programmable measure and stimulus range of ±16V or 0-32V for the analog channels.

Use of the FPGA kernel allows user to develop their own digital I/O options such as CAN bus, counter/timer or high-speed memory access. IP code from sharing sites such as Open Cores can be implemented in the FPGA fabric and accessed via JTAG Technologies' own CoreCommander FPGA translator module.





Article Comments - JTAG Technologies expands boundary-s...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top