Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Sensors/MEMS

MIT team shows method to control nanoscale diamond sensors

Posted: 29 Jan 2014 ?? ?Print Version ?Bookmark and Share

Keywords:MIT? diamond sensor? magnetic field?

A team of researchers at MIT's Quantum Engineering Group has developed a sensing technique intended for diamonds that could allow deeper understanding on how the brain processes information.

Technique allows tiny sensors to monitor small changes in magnetic fields, such as when neurons transmit electrical signals. The method enables control of nanoscale diamond sensors, which are capable of measuring even very weak magnetic fields.

The control technique allows the tiny sensors to monitor how these magnetic fields change over time, such as when neurons in the brain transmit electrical signals to each other. It could also enable researchers to more precisely measure the magnetic fields produced by novel materials such as the metamaterials used to make superlenses and "invisibility cloaks."

In 2008, a team of researchers from MIT, Harvard University and other institutions first revealed that nanoscale defects inside diamonds could be used as magnetic sensors.

Controlling nanoscale diamond sensors

A single nitrogen-vacancy (N-V) center in diamond (right, inset), optically initialized and readout by confocal microscopy, is manipulated with coherent control sequences (red line) of microwave pulses. This measures the arbitrary profile of time-varying magnetic fields radiated by biological sources (or by artificial sources in the researchers' proof-of-principle experiment). Image: Paola Cappellaro (courtesy the researchers)

The naturally occurring defects, known as nitrogen-vacancy (N-V) centers, are sensitive to external magnetic fields, much like compasses, stated Paola Cappellaro, the Esther and Harold Edgerton Associate Professor of Nuclear Science and Engineering (NSE) at MIT.

Defects inside diamonds are also known as color centers, Cappellaro said, as they give the gemstones a particular hue: "So if you ever see a nice diamond that is blue or pink, the color is due to the fact that there are defects in the diamond."

The N-V center defect consists of a nitrogen atom in place of a carbon atom and next to a vacancy, or hollow, within the diamond's lattice structure. Many such defects within a diamond would give the gemstone a pink color, and when illuminated with light they emit a red light, Cappellaro added.

To develop the method of controlling these sensors, Cappellaro's team first probed the diamond with green laser light until they detected a red light being emitted, which told them exactly where the defect was located.

They then applied a microwave field to the nanoscale sensor, to manipulate the electron spin of the N-V center. This alters the intensity of light emitted by the defect, to a degree that depends not only on the microwave field but also on any external magnetic fields present.

To measure external magnetic fields and how they change over time, the researchers targeted the nanoscale sensor with a microwave pulse, which switched the direction of the N-V center's electron spin, noted team member and NSE graduate student Alexandre Cooper. By applying different series of these pulses, acting as filters, each of which switched the direction of the electron spin a different number of times, the team was able to efficiently collect information about the external magnetic field.

They then applied signal-processing techniques to interpret this information and used it to reconstruct the entire magnetic field. "So we can reconstruct the whole dynamics of this external magnetic field, which gives you more information about the underlying phenomena that is creating the magnetic field itself," indicated Cappellaro.

The team used a square of diamond 3mm in diameter as their sample, but it is possible to use sensors that are only tens of nanometers in size. The diamond sensors can be used at room temperature, and since they consist entirely of carbon, they could be injected into living cells without causing them any harm, Cappellaro noted.

One possibility would be to grow neurons on top of the diamond sensor, to allow it to measure the magnetic fields created by the "action potential," or signal, they produce and then transmit to other nerves.

Previously, researchers have used electrodes inside the brain to "poke" a neuron and measure the electric field produced. However, this is a very invasive technique, Cappellaro stated. "You don't know if the neuron is still behaving as it would have if you hadn't done anything," she said.

Instead, the diamond sensor could measure the magnetic field noninvasively. "We could have an array of these defect centers to probe different locations on the neuron, and then you would know how the signal propagates from one position to another one in time," continued Cappellaro.

In experiments to demonstrate their sensor, the team used a waveguide as an artificial neuron and applied an external magnetic field. When they placed the diamond sensor on the waveguide, they were able to accurately reconstruct the magnetic field. Mikhail Lukin, a professor of physics at Harvard, said the work demonstrates very nicely the ability to reconstruct time-dependent profiles of weak magnetic fields using a novel magnetic sensor based on quantum manipulation of defects in diamond.

"Someday techniques demonstrated in this work may enable us to do real-time sensing of brain activity and to learn how they work," said Lukin, who was not involved in this research. "Potential far-reaching implications may include detection and eventual treatment of brain diseases, although much work remains to be done to show if this actually can be done," he added.

Article Comments - MIT team shows method to control nan...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top