Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Manufacturing/Packaging

Quartz crystal in GT cut supports lower MHz frequencies

Posted: 10 Mar 2014 ?? ?Print Version ?Bookmark and Share

Keywords:GT-cut? quartz? crystal?

River Eletec has revealed a quartz crystal unit in the GT cut that covers the frequency range of 8MHz to 20MHz.

The crystal measures 1.6mmx1.2mm. Its width-extensional mode allows a package design unconstrained by blank size, enabling significantly smaller and lower-profile units operating at lower MHz frequencies.

The equivalent circuit constants of GT-cut quartz crystal units are comparable to those of AT-cut units. The devices are very stable to 3ppm in the range of -20C to 70C, and 5ppm in the range of -40C to 85C. They minimise vibration loss and ensure stable oscillation, even when driven at 5W or less. These characteristics are difficult to achieve with traditional AT-cut quartz crystal units, claimed the manufacturer.

Compared to traditional AT-cut, GT-cut units achieve starting oscillation time approximately twice as fast, 550s (compared to 12MHz FCX-05 in the same oscillation circuit and at the same frequency). GT-cut crystals are air-sealed with metal lids welded onto a ceramic package using a proprietary ebeam sealing technique.

- Julien Happich
??EE Times Europe

Article Comments - Quartz crystal in GT cut supports lo...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top