Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > RF/Microwave

UPnP+ links non-IP devices to wide-area networks

Posted: 09 May 2014 ?? ?Print Version ?Bookmark and Share

Keywords:UPnP? plug and play? IoT? Wi-Fi?

The Universal Plug and Play Forum (UPnP) is expanding its product presence in cloud services and the Internet of Things, with a set of specifications and software scheduled to be released later this year.

UPnP+ will expand beyond the group's traditional work on devices using Internet Protocol on Wi-Fi LANs to create bridges to wide-area networks and non-IP devices. The specs and open-source software for it, now in a 60-day review period, should be released on a royalty-free basis before the end of the year.

"Today there's not a good standard for accessing devices across any network, but UPnP is working on it," said Alan Messer, a Samsung researcher in San Jose who is vice president of UPnP.

"The main problems we see are lots of proprietary protocols that don't help anyone in developing ecosystemswe also see lots of proprietary islands," Messer said in a talk at an IoT event here.

UPnP+ supports a product concept of a sensor bridge. The small, low-cost device can store and translate data from a variety of IoT devices that use protocols such as Ant, Z-Wave, and early versions of Zigbee that don't support IP.

Other devices such as a smartphone can also implement the bridging and storing functions, linking the relatively simple IoT devices to Wi-Fi networks and devices that run existing versions of UPnP code.

The UPnP+ Cloud Architecture uses XMPP, widely used in instant messaging services, to link to wide-area networks. However, it will not supportat least in its initial implementationcompeting IoT protocols such as MQTT supported by services from IBM, Xively, and others.

Cloud demo configuration

Figure 1: UPnP+ was demoed using home automation devices working together in Asia and Europe over a cloud service.

A variety of other protocols and initiatives, including the AllSeen effort at the Linux Foundation aim to unify the fragmented Internet of things. Messer said UPnP will consider support for other protocols as its members request it.

"The MQTT protocol hasn't been proven at such large scale as XMPP," Messer said. "Some say [MQTT is] less chatty, but we think for an M2M device it's not so chatty and we see XMPP as more proven," he said.

UPnP+ includes a host of enhancements including support for IPv6, capabilities for discovering cloud services and new grouping/pairing capabilities. It also makes mandatory energy management and security features that were previously optional for gaining UPnP certification.

Cloud demo configuration

Figure 2: UPnP chose XMPP as the basis for its WAN services.

Messer said he expects the Digital Living Network Alliance will adopt the UPnP+ specifications. UPnP has 1,015 members. Its steering committee includes representatives from Cable Labs, Cisco, Intel, and ZTE.

- Rick Merritt
??EE Times

Article Comments - UPnP+ links non-IP devices to wi...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top