Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Interface

Utilising four-wire interface I2C on KE06

Posted: 27 May 2014 ?? ?Print Version ?Bookmark and Share

Keywords:interface? KE06? Kinetis E? four-wire? SMBus?

This application note describes the procedure to use the four-wire I2C interface on KE06 of Kinetis E family. The sample code provided in this application note is tested on KE06 through I2C master/slave communication between two evaluation boards.

KE06 contains two inter-integrated circuit (I2C) modules with SMBus feature. I2C provides a method of communication between a number of devices. The interface operates at up to 100 kb/s with maximum bus loading and timing. The device is capable of operating at higher baud rates, up to a maximum of clock/20, with reduced bus loading. The maximum communication length and the number of devices that can be connected are limited by a maximum bus capacitance of 400 pF.

In addition, KE02 I2C0 also provides four-wire interface option.

View the PDF document for more information.

Originally published by Freescale Semiconductor at as "Using Four-Wire Interface I2C on KE06".

Article Comments - Utilising four-wire interface I...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top