Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > T&M

R&S bares oscilloscope probe interface

Posted: 02 Mar 2015 ?? ?Print Version ?Bookmark and Share

Keywords:Oscilloscope probe? interface?

Rohde & Schwarz added the R&S RT-ZC20B current probe with probe interface to its oscilloscope accessories portfolio.

Through the R&S RT-ZC20B interface, R&S RTO, R&S RTE and R&S RTM oscilloscopes can detect up to four current probes connected in parallel. The instruments also automatically adjust the vertical scaling and zeroing settings. The degaussing function is activated directly on the instrument.

R&S oscilloscope interface

The current probe receives power over the Rohde & Schwarz probe interface, eliminating the need for an external power supply. At 100MHz bandwidth, the R&S RT-ZC20B can measure AC and DC of a maximum 30A (RMS)/50A (peak) current with a resolution of 10mA and low noise.

Combined with the R&S RTO/R&S RTE 16bit high-definition option, currents less than 1mA can also be measured. This makes the current probe ideal for numerous power electronics applications, especially for evaluating switched-mode power supplies that require measurement of high frequency current components.

The new R&S RT ZC20B current probe is now available from Rohde & Schwarz.

Article Comments - R&S bares oscilloscope probe interfa...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top