Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Manufacturing/Packaging
?
?
Manufacturing/Packaging??

Spotlight on position sensor tech for hydraulic cylinders

Posted: 10 Jun 2015 ?? ?Print Version ?Bookmark and Share

Keywords:hydraulic cylinder? position sensor? magnetostrictive? variable resistance? variable inductance?

For the most part, position feedback sensors for hydraulic or pneumatic cylinders have utilised one of three staple technologies: magnetostrictive, variable resistance and variable inductance sensors. Although other sensor technologies have sporadically been used successfully in this application, the focus of this article is the comparison among these three most popularly used technologies.

As the demand for increased control and functionality has increased over the years, sensor- instrumented cylinders are becoming more important in the heavy industry, subsea and mobile equipment worlds.

Ultimately, a user or systems integrator must determine the requirements of the application and which technology best satisfies it on a total installed cost versus performance basis. The strengths and weaknesses of magnetostrictive, variable resistance and variable inductance sensors are discussed below, along with a chart for feature-by-feature comparisons.

Initially, a point to be noted is that all of these common sensing technologies utilise a long probe that extends into a deep, small diameter blind hole which has been gun-drilled into the internal end of the cylinder rod.

Magnetostrictive technology has been the preferred technology for high accuracy applications. The sensor, often called an LDT or MLDT, incorporates a stainless steel tubular probe and a short toroidal permanent magnet assembly around it that is installed in a counterbore in the piston.

The most common package is designed to thread the sensors' electronics housing into an o-ring port in the back of a cylinder, with the long slender probe inserted into the rod's bore.

It uses the "time of flight" principle to determine the magnet's position with high accuracy and moderate response time. The magnet is used to reflect a torsional mechanical pulse which is transmitted along a special wire inside of the probe called a waveguide. Typically, each of the magnetostrictive sensor manufacturers has its own style of magnet with unique mounting features such as the number of holes, the hole pattern, etc.

Magnetostrictive, variable resistance and variable inductance sensors

Magnetostrictive sensors can consume a fair amount of power and are not the most mechanically rugged sensors. They offer electrical performance over mechanical robustness, because they are subject to shock and vibration issues. Yet, while there are some potential drawbacks mechanically, the magnetostrictive sensor's package design is tailor-made for port-mounted in-cylinder use.

1???2???3?Next Page?Last Page



Article Comments - Spotlight on position sensor tech fo...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top