Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

NFC sol'n enables secure ARM mbed wearable reference design

Posted: 29 Feb 2016 ?? ?Print Version ?Bookmark and Share

Keywords:Ams? STMicroelectronics? NFC? ARM? wearable?

Ams AG and STMicroelectronics have announced that ARM is using the companies' NFC solution to deliver the secure, high-performance NFC and MCU capability in its latest wearable reference design.

The NFC solution developed jointly by ST and Ams is composed of the ST54E from ST, a system-in-package featuring an NFC controller (NFCC) and a secure element compliant with the GlobalPlat-form standard v2.2, and Ams' AS39230 NFC analogue front end with boostedNFC technology. This NFC solution is particularly geared for very small, battery-powered products such as wearable devices and smartphones.

The Ams boostedNFC technology overcomes the difficulties that conventional NFC devices face when attempting to operate via a tiny antenna in an environment hostile to RF trans-missions. The Ams/ST solution exceeds the EMVCo requirements for RF performance in contactless payments, even when operating through an antenna smaller than 100mm2, the companies said.

The ST SiP provides comprehensive support for all important NFC security standards worldwide, ensuring that the ARM mbed Wearable Reference Design can support secure transaction types required in Internet of Things (IoT) applications including, but not limited to, contactless payments, automatic fare collection and access control.

Ams AS39230

The joint Ams/ST solution achieves very low average power consumption, helping to extend battery run-time between charges, thanks to fully configurable power cycling of both the boostedNFC front end and the NFCC.

The mbed Wearable Reference Design provides a model that wearable device OEMs can quickly replicate to achieve high-performance NFC card emulation. The joint Ams/ST solution is particularly easy for system designers to work with, since it is supplied with a complete NFC software stack developed by ST, the companies noted. This stack is compatible with ARM's mbed IoT Device Platform.

In addition, the high RF performance of the Ams/ST solution ensures robust NFC functioning even in the most demanding operating environments. The NFC system draws on unique capabilities in the Ams AS39230, which implements active load modulation. This boosts the NFC front end's transmission signal to achieve an 'operating volume,' the space in which the wearable reference design can couple with an NFC reader, comparable to or exceeding that of a contactless card, which will typically have an antenna that is some 40 times bigger. The solution provided by ST and Ams is also optimised for the mbed Wearable Reference Design's antenna, giving high immunity to interference from the Wearable Reference Design's Bluetooth and GPS radios.

1???2?Next Page?Last Page



Article Comments - NFC sol'n enables secure ARM mbed we...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top