Programmable Frequency Sweep and Output Burst Waveform Generator
Analog Devices Inc.
Description
The AD5930 is a waveform generator with programmable frequency sweep and output burst capability. Utilizing embedded digital processing allowing enhanced frequency control the device generates...
Features
Programmable frequency profile No external components necessary Output frequency up to 25 MHz Burst and listen capability Pre-programmable frequency profile minimizes number of DSP/μcontroller writes Sinusoidal/triangular/square wave outputs Automatic or single pin control of frequency stepping Waveform starts at known phase Increments at 0° phase or phase continuously Power-down mode: 20 μA Power supply: 2.3 V to 5.5 V Automotive temperature range: ?40°C to +125°C 20-lead pb-free TSSOP
Related Datasheets
Part Number | Description | Category |
? ?AD5932 | Programmable Single-Scan Waveform Generator | ICs, Power Management |
? ?AD9830 | Numerically Controlled Oscillator, a sine Look-up Table and a 10-Bit D/A Converter Integrated on a Single CMOS Chip | ICs, Power Management |
? ?AD9831 | 25 MHz Parallel Loading DDS With On-Chip 10-Bit DAC | ICs, Power Management |
? ?AD9832 | 25 MHz Serial Interface DDS With On-Chip 10-Bit DAC | ICs, Power Management |
? ?AD9833 | +2.3 V to +5.5 V, Low Power (20 mW), Programmable Waveform Generator in 10-Pin μSOIC Package | ICs, Power Management |
? ?AD9835 | Complete DDS With 10-Bit On-Chip DAC | ICs, Power Management |
? ?AD9850 | CMOS, 125 MHz Complete DDS Synthesizer | ICs, Power Management |
? ?AD9859 | 400 MSPS 10-Bit DAC 1.8 V CMOS Direct Digital Synthesizer | ICs, Power Management |
? ?AD9911 | 500 MSPS Direct Digital Synthesizer w/10-Bit DAC | ICs, Power Management |
? ?AD9958 | 2-Channel 500 MSPS DDS with 10-Bit DACs | ICs, Power Management |
As the hyperlinked contents/websites are those of third parties, we cannot vouch for their accuracy or legitimacy.
Interviews & Viewpoints
Bloggers Say
See what engineers like you are posting on our pages.