Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
?


( File format: PDF, 297 KB )
Power Logic 8-Bit Shift Register (Rev. A)
Texas Instruments

Description
The TPIC6A596 is a monolithic, high-voltage, high-current power logic 8-bit shift register designed for use in systems that require relatively high load power. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids, and other medium-current or high-voltage loads. Each open-drain DMOS transistor features an independent chopping current-limiting circuit to prevent damage in the case of a short circuit. This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit, D-type storage register. Data transfers through both the shift and storage registers on the rising edge of the shift-register clock (SRCK) and the register clock (RCK), respectively. The storage register transfers data to the output buffer when shift-register clear (SRCLR)\ is high. When SRCLR\ is low, all registers in the device are cleared. When output enable G\ is held high, all data in the output buffers is held low and all drain outputs are off. When G\ is held low, data from the storage register is transparent to the output buffers. The serial output (SER OUT) is clocked out of the device on the falling edge of SRCK to provide additional hold time for cascaded applications. This will provide improved performance for applications where clock signals may be skewed, devices are not located near one another, or the system must tolerate electromagnetic interference. Outputs are low-side, open-drain DMOS transistors with output ratings of 50 V and a 350-mA continuous sink current capability. When data in the output buffers is low, the DMOS-transistor outputs are off. When data is high, the DMOS-transistor outputs have sink current capability. Separate power ground (PGND) and logic ground (LGND) terminals are provided to facilitate maximum system flexibility. All PGND terminals are internally connected, and each PGND terminal must be externally connected to the power system ground in order to minimize parasitic impedance. A single-point connection between LGND and PGND must be made externally in a manner that reduces crosstalk between the logic and load circuits. The TPIC6A596 is offered in a thermally-enhanced dual-in-line (NE) package and a wide-body surface-mount (DW) package. The TPIC6A596 is characterized for operation over the operating case temperature range of -40C to 125C.
Features
Low rDS(on) . . . 1 Typ Output Short-Circuit Protection Avalanche Energy . . . 75 mJ Eight 350-mA DMOS Outputs 50-V Switching Capability Enhanced Cascading for Multiple Stages All Registers Cleared With Single Input Low Power Consumption

Related Datasheets
Part Number Description Category
? ?TPIC2810 8-Bit LED Driver with I2C Interface (Rev. A) ICs, RF/Wireless
? ?TPIC6259 Power Logic 8-Bit Addressable Latch (Rev. A) ICs, RF/Wireless
? ?TPIC6595 Power Logic 8-Bit Shift Register (Rev. B) ICs, RF/Wireless
? ?TPIC6596 Power Logic 8-Bit Shift Register (Rev. A) ICs, RF/Wireless
? ?TPIC6A595 Power Logic 8-Bit Shift Register (Rev. B) ICs, RF/Wireless
? ?TPIC6C596 Power Logic 8-bit Shift Register (Rev. C) ICs, RF/Wireless



As the hyperlinked contents/websites are those of third parties, we cannot vouch for their accuracy or legitimacy.
Interviews & Viewpoints

Talk

Learn how senior executives are seeing the industry from interviews and contributed opinions.

Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top