Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > 65nm process

65nm process Search results

?
?
total search977 articles
2007-02-09 Xilinx ships 65nm FPGAs for high-performance DSPs
Xilinx has announced initial shipments of its 65nm Virtex-5 SXT FPGAs optimized for high-performance DSPs
2007-01-08 Xilinx claims industry's 'largest' 65nm FPGA
Developed using 65nm technology, Xilinx claims its Virtex-5 LX330 FPGA delivers 65 percent more logic than the largest 90nm FPGAs
2004-04-23 VLSI papers weigh 65nm, new circuits
While technologists look to 65-nanometer nodes, circuit designers by and large are two generations back.
2007-06-07 USB PHY trims power in 65nm, 45nm SoC designs
Chipidea introduces a USB PHY core for 1.8V I/O devices that it says offers the industry's lowest power consumption for SoC designs in the 65nm and 45nm advanced technology nodes
2007-06-12 UMC, ARM team on 65nm SOI solutions
United Microelectronics Corp. and ARM announced that a test chip built with ARM silicon-on-insulator libraries was taped-out successfully on UMC's 65nm SOI process.
2006-06-27 UMC is getting 65nm interest
According to major silicon foundry United Microelectronics Corp., it has been getting a lot of interest in 65nm designs
2004-08-24 UMC 'engaging' customers with new 65nm process
Amid a major shift towards 90nm technology on 300mm wafers, Taiwan's United Microelectronics Corp. (UMC) is quietly "engaging" customers with its new and unannounced 65nm process.
2006-05-29 TSMC, UMC ready for 65nm X Architecture designs
Taiwan Semiconductor Manufacturing Co. Ltd (TSMC) and United Microelectronics Corp. (UMC) recently announced that they have validated Cadence Design Systems Inc.'s X Architecture for 65nm production
2004-11-17 TSMC's 65nm process set to arrive late 2005, cost $1 billion
By the time Taiwan Semiconductor Mfg Co. Ltd (TSMC) ramps its first 65nm manufacturing process technology into volume production, late in 2005, it will have cost about $1 billion to develop, according to company chairman Morris Chang.
2005-04-28 TSMC unveils 65nm process, production due December
Foundry chip maker Taiwan Semiconductor Mfg Co. Ltd unveiled its 65nm manufacturing process at its Technology Symposium held in San Jose, California, declaring that first wafers processed with the rules are expected in December.
2006-05-26 TSMC to kick off 65nm technology operations
TSMC has qualified its 65nm low-power process technology, and expects to begin operations soon.
2003-04-30 TSMC takes wraps off 65nm plans
In the face of stiff competition and a few lost customers, Taiwan Semiconductor Mfg Co. Ltd has become more aggressive in making its case as a technology leader.
2005-04-29 TSMC sees low-power process as new technology driver
Changing its strategy in midstream, Taiwan Semiconductor Mfg Co. Ltd (TSMC) this week made a major but overlooked announcement.
2005-06-13 TSMC releases reference design flow for 65nm processes
Taiwan Semiconductor Mfg Co. Ltd has released version 6.0 of its reference flow, the sequence of EDA tools that the world's largest foundry recommends for its 65nm manufacturing processes
2006-07-28 TSMC qualifies Mentor's Calibre nmDRC on 65nm process
Mentor Graphics announced that Taiwan Semiconductor Manufacturing Co. has qualified Calibre nmDRC for its 65nm technology
2005-10-07 TSMC launches 65nm CyberShuttle service
Taiwan Semiconductor Manufacturing Co. Ltd. (TSMC) said Wednesday (Oct. 5) it has completed the first run of its 65nm CyberShuttle prototyping service carrying customer designs
2006-12-08 True Circuits rolls out silicon proven 65nm analog IP
True Circuits Inc. has announced "silicon proven" phase-locked loop and delay-locked loop hard macros using TSMC's 65nm process.
2006-02-13 TI, MIT, DARPA collaborate on 65nm SRAM
Researchers from Massachusetts Institute of Technology presented an ultra low power 256Kb SRAM test device manufactured in Texas Instruments' 65nm CMOS process.
2005-02-15 TI to begin sampling initial 65nm DSP devices
At the International Solid State Circuits Conference (ISSCC) here, Texas Instruments Inc. disclosed that it will shortly begin sampling its first 65nm devices amid an aggressive ramp on the 90nm front
2007-05-14 TI takes single-chip cellphone offerings to 65nm
Seeking to stay one step ahead of its competitors, TI will be shipping single-chip cellphone offerings manufactured in the 65nm process.
2006-05-17 TI signs up Chartered for 65nm production
Texas Instruments is tweaking its manufacturing strategy, adding Chartered Semiconductor Mfg as a third foundry for 65nm production
2006-05-05 TI qualifies foundries for 65nm process
Texas Instruments is qualifying select silicon foundries for its 65nm process as part of an aggressive ramp for the technology.
2008-02-07 TI bares details of 45nm process
TI has revealed that its 45nm process uses strained silicon, immersion lithography and ultra-low k dielectrics to lower power and increase performance compared with its 65nm process, and double the number of chips produced on each 45nm silicon wafer.
2008-03-17 Succeed at 65nm design
A true DFM-aware environment accounts for process variability and lithographic effects in the context of timing, power, noise and yield at every stage of the flow. This begins with the characterization of the cell library, continues through implementation, analysis and optimization, and ends with sign-off verification
2004-12-21 STMicro has full 65nm IC, offers 65nm design platform
STMicroelectronics said Dec. 16 that it has completed the design, and tape-out, of a complex IC that demonstrates its 65nm manufacturing process technology.
2009-09-21 ST-Ericsson debuts 65nm TD-HSPA modem chips
ST-Ericsson and its China subsidiary T3G are sampling what they tout to be the first 65nm TD-HSPA modem chip
2008-05-27 ST embraces 65nm process for SPEAr customizable chip
STMicroelectronics introduces a new member of its SPEAr family of configurable SoC ICs.
2003-04-23 Sony to deploy new fab line for 65nm process technology
Sony Computer Entertainment Inc. (SCEI) and Sony Corp. have decided to invest a total of about 200 billion yen over three fiscal years from 2003 to 2005 in the installation of a semiconductor fabrication line to build chips with 65nm process on 300mm wafers.
2005-10-31 SMIC to sample 65nm by end of '06
Semiconductor Manufacturing International Corp. (SMIC) President and CEO Richard Chang said Thursday (Oct. 27) that his company would deliver 65nm engineering samples in 2006
2010-08-05 SMIC churns out 65nm wafers in Beijing
Semiconductor Manufacturing International Corp. (SMIC) has moved its low-leakage 65nm process technology into volume production at its 300mm facility in Beijing, the company said. It is also working on the transition to 55nm technology.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top