Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > amp power

amp power Search results

?
?
total search860 articles
2013-09-02 Reducing device power consumption (Part 3
Part 3 continues with the discussion on different network standby techniques to reduce power
2013-08-26 Reducing device power consumption (Part 2
In this instalment, we will focus on automated proxy.
2013-08-12 Reducing device power consumption (Part 1
The first instalment discusses the embedded cyclical states and packet classification.
2007-06-04 Quad op amp delivers low offset
iC-Haus GmbH delivers its new unity gain stable quad op amp that features an offset of less than 1?V at 3.5MHz
2010-12-14 Processor family cuts operating power
The power management features of Applied Micro Circuits' Mamba single and dual-core devices let developers lower operating power based on usage models and specific application needs
2007-04-02 Precision op amp targets satellite applications
National Semiconductor has announced the first dual amplifier in its new family of precision op amps specifically QMLV-qualified for satellite applications.
2008-02-18 Precision op amp suits high-voltage apps
TI has released the OPA454, a precision power operational amplifier that operates on supplies up to 100V and delivers a high output current of 50mA with a 150mA short circuit limit
2014-09-01 Power tip: Selecting rectifiers for flybacks
The choice of rectifiers is crucial to the design of a flyback as they influence cross regulation over load and temperature, efficiency, and transformer design.
2013-01-03 Power tip: Filter for low-noise power supply
Find out what happens when you use a two-section filter for low-noise power supplies
2013-10-21 Power tip: Compensating for cable drop
Find out how to compensate for cable drop without the need for remote sensing.
2009-03-11 Power Tip #2: Overcoming power supply's noise issues
A noise-free power supply is not an accident. A good power supply layout is essential to minimize lab time when bringing up a new design. A few hours or even minutes spent looking over the layout can save days of troubleshooting down the road
2014-05-13 Power tester detects thermally-induced failures in real time
The industrial power tester from Mentor Graphics can power modules through tens of thousandspotentially millionsof cycles while providing "real-time" failure-in-progress data for diagnostics
2014-10-17 Power firms form industry consortium
Promising an efficient, multi-sourced power ecosystem, the AMP Group will provide power system designers with innovative technology and supply chain security.
2001-06-05 Power dividers/Combiners
This application note is intended to provide the designer with basic information describing the function of power dividers/combiners and to define the performance parameters and trade-offs critical to specifying a power divider
2005-07-15 Power detectors shrink to 1mm&sup2
Manufactured using a BiCMOS process, the new RF power detectors from National Semiconductor are optimized for power consumption
2005-08-25 Power detector/controller combines low power, small packaging
ADI said its latest power detector/controller accurately measures RF signals over the industry's widest frequency range, and delivers an exceptional combination of low power, small packaging and fast output response time
2008-05-05 Power amps tout high linearity, low power
Avago Technologies has introduced 1W and 2W families of high-performance power amplifiers designed for next-generation cellular and WiMAX infrastructure applications
2010-03-12 Power amps improve WiMAX apps signal quality
Avago offers power amplifier modules that feature low power consumption and improves signal quality for WiMAX and Wi-Fi applications that operate in the 2GHz range
2012-01-24 Power amp targets 4G LTE infrastructure
The MGA-43128 is high-linearity power amplifier for high-data-rate applications found in 700-800MHz cellular infrastructure equipment
2008-04-28 Power amp suits 3G handsets for W-CDMA network
Anadigics has released the AWT6281 HELP3 W-CDMA linear power amplifier engineered specifically for use in advanced 3G handsets for EGSM (Band 8) UMTS wireless networks
2010-02-26 Power amp simplifies 3G handset design
The Javelin JAV5001 power amplifier improves battery life, robustness and reliability while simplifying the design-in process for 3G mobile phones and datacards
2010-01-15 Power amp provides 25W over 20MHz to 6GHz
From Cree Inc. comes the CMPA0060025F GaN HEMT MMIC power amplifier, which offers 25W output power over an instantaneous bandwidth of 20MHz to 6GHz
2010-06-28 Power amp packs interstage power detector
From RFMD comes the RF5616 highly integrated 4.9GHz to 5.8GHz (ISM band) 3mm x 3mm power amplifier designed to significantly reduce customers' total solution size and cost
2007-02-16 Power amp optimizes battery life of 3G handsets
TriQuint's quad-band GSM/EDGE-Polar power amplifier module provides a high level of battery life for 3G wireless handsets, PDAs and laptop data cards
2010-03-01 Power amp meets TD-SCDMA performance metrics
The RF7234 and RF3266 PAs deliver superior performance at peak power conditions and ample margin meeting the critical performance metrics of today's TD-SCDMA handsets
2006-11-29 Power amp loads 20mW for weak signal amplification
New Japan Radio has announced the NJM2278, a 20mW power amplifier designed for use in the transmitters of specific extremely low-power radio equipment using weak signals in the 300/400MHz bandwidth
2006-01-19 Power amp IC extends battery life
ST announced a compact Class D power amplifier chip intended for the new generation of mobile phones and other products seeking to provide higher audio power output while preserving and extending battery life
2009-05-25 Power amp geared for mobile WiMAX systems
Anadigics Inc. has rolled one of the first mobile WiMAX 4G power amplifiers (PAs) developed for use in the 3.4- to 3.6GHz spectrum adopted by broadband wireless service providers in Europe and South America
2012-03-30 Power amp geared for high capacity E-band radios
The EXT7601 and EXT8601 power amplifier chipsets from GigOptix provide Psat output power of 23dBm in the 71-76GHz band and 22dBm in the 81-86GHz band
2012-03-01 Power amp for WCDMA, LTE/4G apps
RFMD's 4G LTE and WCDMA power amplifiers claim to deliver top notch efficiency and performance in smartphones and other data-centric connected devices
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top