Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > analysis

analysis Search results

total search4378 articles
2015-01-19 RFID sniffer touts real-time analysis of reader, tag signals
The ultra-high frequency device from CISC Semiconductor records and analyses the communication between the tag and reader in real-time, and covers the RF band from 50MHz to 2.2GHz.
2008-07-25 RF tool adds 5.7Mbit/s HSUPA data analysis
Agilent Technologies Inc. has announced a new 5.7Mbit/s HSUPA test capability for its W-CDMA/HSPA Test and Lab Applications, which run on the 8960 (E5515C) Wireless Communications Test Set.
2002-12-16 RF measurement using vector analysis
Vector analysis offers many advantages for measuring general-purpose RF signals by dramatically improving measurement throughput.
2002-11-15 Researchers seek MEMS analysis tools
In a technical session at ICCAD in San Jose, California researchers presented work on analysis techniques to deal with the unique structures of MEMS.
2002-12-09 Researchers call for fundamental shift in timing analysis
Calling for a new approach to the design of digital circuits, researchers at the ACM/IEEE Tau workshop presented strong arguments for a move to statistical, or "probabilistic," timing analysis.
2005-04-12 Renesas uses CoolTime for voltage drop analysis
Renesas Technology Corp. has adopted Sequence Design's CoolTime as its standard for dynamic voltage drop analysis on next-generation SoC designs.
2005-10-24 Renesas to use Ponte Solution yield analysis
Design-for-yield company, Ponte Solutions, Inc. has announced that Renesas Technology Corp. of Japan will use its model-based yield analysis technology. Renesas will use the technology for critical area analysis and yield-loss reduction from random defect-limited yield issues for 65nm technologies. The two companies will also work on more advanced yield analysis technologies.
2012-11-09 Remove pessimism and optimism in timing analysis
Pessimism could not only increase the time to fix the critical paths, but could also adversely affect other crucial parameters such as power and area.
2004-10-18 Reducing jitter via board layout analysis
By understanding the source of jitter, one can minimize its impact and make cost vs. performance trade-offs optimize the final product.
2002-04-01 Reducing fault-coverage analysis with DFT, Part 2
This technical paper is the second of a two-part discussion wherein the author considers fault-coverage analysis and simulation for full-scan testing of ASIC designs.
2002-03-16 Reducing fault-coverage analysis with DFT
This technical article is the first of two parts that considers how fault-coverage analysis and simulation for full scan testing of ASIC designs are equally applicable to other types of IC design, chiefly of which are FPGAs.
2007-05-01 Reduce auto cabin noise with NVH analysis
This article describes an approach implemented by LMS International to reduce the noise, vibration and harshness (NVH) levels of a new car model from an automotive OEM.
2001-04-26 Receiver characterization using periodic small-signal analysis
This application note presents several approaches to characterize the transfer functions, noise and distortion of communication circuits using periodic small-signal analysis.
2004-12-17 Real-time spectrum analysis tools aid transition to third-generation wireless technology
This app note discuses real-time spectrum analysis tools for third-generation wireless technology.
2002-05-02 Real-time spectrum analysis tools aid transition to 3G wireless technology
This application note explains the ability of the real-time spectrum analyzer to capture the full frequency breadth-of-spread-spectrum digital wireless channels and its advantage when designing, debugging and installing the latest wireless equipment.
2008-06-24 Real-time spectrum analysis for EMI diagnostics
This application note from Tektronix briefly examines the different stages of design and test with respect to test equipment and measurement techniques.
2013-05-27 R&S RTO upgraded with jitter analysis on clock, data signals
Rohde & Schwarz recently upgraded the R&S RTO to feature a low-noise frontend, high dynamic range ADC, high acquisition and analysis rate and a digital trigger system with extremely low trigger jitter.
2001-09-17 Qecc protocol analysis of OC-N/STM-N networks
This application note provides a data extraction solution to perform protocol analysis of Embedded Control Channel (ECC) information on STM-N/OC-N circuits.
2010-03-12 Pulse-CO oximeter takes blood analysis out of lab
Few disciplines can turn the cold science of metrology into pure art as quickly as medical diagnostics. Here's a teardown of the Masimo's Radical-7 Signal Extraction Pulse-CO Oximeter.
2001-09-14 Protocol analysis of user data encapsulated within OC-N/STM-N networks
This application note presents a solution to analyze and extract the desired PDH signal from the higher-speed carrier within an OC-N/STM-N data stream.
2002-09-25 Program for Measurement Uncertainty analysis with Rohde & Schwarz Power Meters
This application note describes the Measurement Uncertainty Analysis Program NRV-Z.
2002-09-25 Program for Measurement Uncertainty Analysis with Rohde & PC Software
This application note describes the use of the SetupAccelerator PC software in the SMIQ signal generator.
2003-09-01 Predictive analysis for low-power IA designs
Predictive analysis techniques incorporates low-power design techniques and ensures adherence to new design methodologies.
2014-10-28 Practical feedback loop analysis for boost converter
The boost converter belongs to the family of indirect energy transfer converters. This application note describes how to select the placement of poles and zeros with several rules.
2004-09-08 Power-grid analysis tool gets a revamp
Donald Bennett, a design engineer in Lochore, Scotland, is taking steps to make himself a one-man commercial EDA vendor.
2004-02-16 Power grid analysis on IR drop and electromigration
IC designers can no longer assume that their Vdd and Vss grids have been designed correctly. They must perform analysis to understand how robust their power distribution methodology really is.
2007-06-18 Power analysis tool aims at 45nm, 65nm designs
Extending its IC power-analysis capability to include several emerging methodologies, Apache Design Solutions Inc. introduced RedHawk-ALP that provides dynamic power integrity analysis for power-gated memories, VTCMOS circuits with substrate back-biasing and on-chip LDO voltage regulators.
2009-07-21 Platform enables Android performance analysis
Mirabilis Design Inc. and TOPS Systems Corp. have jointly introduced the Android on VisualSim architecture exploration platform for hardware-software architecture exploration as well as power and performance analysis of consumer devices.
2001-04-26 Periodic s-parameter and noise analysis using SpectreRF PSP/PNOISE analyses
This application note describes how to calculate small-signal quantities, such as noise, noise figure, periodic scattering parameters and gain in periodically driven circuits. It explains the concepts of periodic S-parameter, noise correlation parameters, and the various definitions of noise figure and gain.
2013-05-23 Performing synthesis-aware clock analysis
Read about a tool that performs clock structure analysis by tracing complex clock nets and visually presenting them to designers.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

Back to Top