Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > application note

application note What are application notes? Search results

?
?
What are application notes?
Application notes refer to instuctions and recommendations from the vendor provided in addition to the normal reference manuals.
total search6467 articles
2009-06-15 Power quad flat pack no-leads (PQFN) board mounting application note
This application note contains guidance applicable to Power QFN package. There are device outlines, substrate layouts and stencil designs for Power QFN MCM.
2009-06-16 Power QFN technology inspection application note
This application note contains guidance applicable to Power QFN package.
2001-05-21 Porting a SPOX-KNL V2.2 application to DSP/BIOS II
This application note describes the major incompatibilities and provides instructions for porting a SPOX-KNL v2.2 application to DSP/BIOS II.
2002-11-20 PCB2421 1k dual mode CMOS serial EEPROM for monitor application
This application note shows the differences between the Philips PCB2421 Vesa EEPROM and the microchip 24LC21.
2000-06-16 P.F.C. application ideas using mains transformer
This application note quantifies the effect of a PFC pre-regulator stage, connected to a typical dc/dc converter in terms of efficiency, harmonic content and apparent power (VA) drawn from the mains.
2002-03-01 OXFW900 Application Notes
This application note presents guidelines for hardware implementation of the Oxford Semiconductor OXFW900 chips for various 1394 to ATA/ATAPI native bridge applications version 1.0
2001-10-12 OC-48 application note with AMAZON/S3064/63/40 and Sumitomo fiber optic
This application note describes a Physical Media Dependent (PMD) layer solution for SONET/SDH data transfer with the use of AMCC's S3063 transmitter, S3064 receiver, S3040 CDR and AMCC/CIMARON AMAZON S4801 POS/ATM SONET mapper, and Sumitomo's SDM7128-XC fiber optic transceiver.
2001-10-18 OC-48 application note with AMAZON/S3059/S3056 and Sumitomo fiber optic
This application note describes a Physical Media Dependent (PMD) layer solution for SONET/SDH data transfer with the use of the AMCC S3059 transceiver, S3056 CRU and AMAZON S4801 POS/ATM SONET mapper and Sumitomo SDM7128-XC fiber optic transceiver.
2001-10-18 OC-48 application note with AMAZON/S3057/S3056 and Sumitomo fiber optic
This application note describes a Physical Media Dependent (PMD) layer solution for SONET/SDH data transfer with the use of the AMCC S3057 transceiver, S3056 CRU and AMAZON S4801 POS/ATM SONET mapper, and Sumitomo SDM7128-XC fiber optic transceiver.
2001-10-18 OC-48 application note with AMAZON/S3057/S3040 and Sumitomo fiber
This application note describes a Physical Media Dependent (PMD) layer solution for SONET/SDH data transfer with the use of the AMCC S3057 transceiver, S3040 CRU and S4801 AMAZON POS/ATM SONET mapper and Sumitomo SDM7128-XC fiber optic transceiver.
2001-10-12 OC-48 application note with AMAZON/S3044/83/40 and Sumitomo fiber optic
This application note describes a Physical Media Dependent (PMD) layer solution for SONET/SDH data transfer with the use of AMCC's S3083 transmitter, S3044 receiver, S3040 CDR and AMCC/CIMARON AMAZON S4801 POS/ATM SONET mapper, and Sumitomo's SDM7128-XC fiber optic transceiver.
2001-10-17 OC-48 application note S3041/42/45/76, S1202 and Lucent fiber optic XCVR
This application note describes the operation of the AMCC STS-48/STM-16 multiplexer and demultiplexer solution, which consists of the AMCC S3041/42/45 transceivers, S3076 CRU and S1202 NILE SONET mapper and a Lucent fiber optic transceiver.
2007-08-08 Notes on femto base station application and a radio approach
This application note discusses the development and deployment of 3G cellular femto base stations.
2005-06-22 NIS6111 BERS_ IC (better efficiency rectifier system) switching application note
This app note details NIS6111 BERS that consists of an integrated control IC and a low RDS (on) power MOSFET to replace the Schottky diode using hybrid technology
2001-04-04 NE5560 push-pull regulator application
This application note describes how to use Philips Semiconductors' NE5560/SE5560 devices as a push-pull switched-mode regulator.
2000-04-03 MultiMediaCard Application Note: Low-cost interface for the MultiMediaCard
This application note describes the structure of a low-cost interface for the MultiMediaCard. The interface is common for all microcontrollers and DSPs using a supply voltage of 2V to 3.6V. Connecting the device to microcontrollers with higher supply voltages is only possible by using voltage level converters.
2008-09-15 Multicell Li-ion and Li-Pol battery gas-gauge application using the bq26500
This application report describes implementation of multicell battery packs using bq26500 circuits
2001-10-10 MSV37531 application note
This application note discusses the MSV37531 evaluation board containing the M37531 8-bit microcontroller.
2003-08-29 MSK and its Application to Wireless Data Transmission
This application note discusses some general procedures and guidelines to implement a simplified MSK modem.
2001-09-05 MSK and its application to wireless data transmission
This application note provides a detailed overview of Minimum Shift Keying (MSK). It essentially discusses how MSK modems work and explains a method to model their behavior.
2001-04-26 Modeling and application of bonding pads
This application note describes the algorithms used inside the modeling and the typical usages of bonding pads in the real circuit environment.
2001-10-12 miniKit320C31Vplus application note
This application note describes how to interface the miniKit-320C31V HostBus to the miniKit-320C31V miniBus/ExpansionBus.
2014-05-08 MCU in RGB LED lighting application
Read about the MC9S12ZVL32 device in an RGB LED lighting application, capable of RGB LED control and diagnostics
2004-12-14 MCore EBDI interface application note
This app note discusses the MCore EBDI interface
2008-01-23 MC9RS08KA application hints
This application note by Murray Stewart discusses the use of MCUs, focusing on Freescale's MC9RS08KA. Techniques and hints presented are aimed at avoiding EMI, noise, and marginal designs that may disturb circuit operation and cause system malfunctions.
2000-12-08 MC44603 in a 110W output SMS application (80-140Vrms and 180-280Vrms Mains voltages
This application note is intended to present a way of designing the MC44603 in a flyback-dedicated design to a 110W output power supply in two distinct cases: 110Vrms mains and 220Vrms mains.
2009-05-28 MAX1452 nonlinearity-correction application circuit
Although nonlinearity correction has not been implemented in the MAX1452, it can be achieved simply by using an additional three resistors in the application circuit. This application note presents such a circuit and provides data that supports its effectiveness.
2005-06-02 Materials and practices application note
This app note offers guidelines for designing and assembling boards using this range
2001-10-09 M16C/62 group application note: Simple I? bus
This application note serves as a reference material to help circuit designers control the simple I? bus mode that is contained in Mitsubishi's 16-bit M16C/62 microcomputer series.
2000-06-15 LNBP For Set Top Box Application
This application note shows how to use the LNBP monolithic positive voltage regulator in two basic applications: the first is based on the Power SO-20 package and circuit functionality, and the second is an implementation in a Multiwatt 20 package.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top